Last $0.06 USD
Change Today 0.00 / 0.00%
Volume 0.0
CLICF On Other Exchanges
As of 4:30 PM 01/8/15 All times are local (Market data is delayed by at least 15 minutes).

select sands corp (CLICF) Snapshot

Previous Close
Day High
Day Low
52 Week High
03/20/14 - $0.32
52 Week Low
01/6/15 - $0.06
Market Cap
Average Volume 10 Days
Shares Outstanding
Dividend Yield
Current Stock Chart for SELECT SANDS CORP (CLICF)

Related News

No related news articles were found.

select sands corp (CLICF) Related Businessweek News

No Related Businessweek News Found

select sands corp (CLICF) Details

Select Sands Corp. engages in the exploration and development of mineral properties. The company has an option to acquire a 100% interest in an approximately 520-acre prospective tier 1 frac sand property located in northeast Arkansas, the United States. It also holds interests in gold deposits located in the La Ronge Gold Belt, northern Saskatchewan, Canada, as well as other gold projects located in Ontario and Saskatchewan in Canada. The company was formerly known as La Ronge Gold Corp. and changed its name to Select Sands Corp. in November 2014. Select Sands Corp. is based in Vancouver, Canada.

select sands corp (CLICF) Top Compensated Officers

Chief Executive Officer, President and Direct...
Total Annual Compensation: C$214.0K
Compensation as of Fiscal Year 2013.

select sands corp (CLICF) Key Developments

Select Sands Corp. Announces the Results of Drill Hole ST14-02

Select Sands Corp. announced the results of drill hole ST14-02 (0-32 feet). Stim-Lab analysed two grades of 40/70 mesh and 100 mesh. The Sieve Analysis of Submitted Proppant Samples is as follows: 5.1 % as 20/40, 15.1 % as 30/50, 32.7% as 40/70 and 56.6 % as 100 mesh. Measurement of Properties of Proppants are following: Sphericity =0.8, Roundness =0.8, acid solubility 0.7%, turbidity 11NTU. The "Proppant Crush-Resistance Test" (K-Value) of 40/70 crush at 10,000 PSI generating 9.9 % fines equating to 10K for 40/70 mesh; 70/140 (100 mesh) crush at 10,000 PSI generated 9.4% fines resulting in 10K crush for 100 mesh as well. XRD results indicate 99% quartz, trace of K-feldspar, trace Calcite, less than 1% clays and less than 1% Illite. The bulk density is 1.47 g/cm3. Proppant properties are defined as per the ISO 13503-2:2006/API RP 19C recommended practice for measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations. These properties include sand sphericity and roundness, crush (K value), acid solubility, turbidity, and SiO2 (silicon dioxide) content. The company announced the start of an infill drill program to delineate resources. There are about 13 drill holes planned in the phase 2 drill programs. Phase 1 drilling is complete and the results are very favorable to take the next step of the infill drill program. The phase 2 in-fill drill program is anticipated to start February 20, 2015.

Select Sands Corp. Announces Executive Changes

Select Sands Corp. announced the appointment of Mr. Darren Urquhart as Chief Financial Officer of the company. Mr. Urquhart is a Chartered Accountant and a Member of the Institute of Chartered Accountants of British Columbia since 2001. Mr. Urquhart will be replacing Larry Johnson as CFO.

Select Sands Corp. Provides Update on Drill Program on Sandtown Frac Sand Property

Select Sands Corp. provided an update on its ongoing drill program on its Sandtown Frac Sand property located in northeast Arkansas, USA. The property is underlain by the Ordovician St. Peter sandstone formation, which is the source of 'Ottawa White' frac sand selling into the major US oil and gas plays. There are several surface outcrop exposures of the St. Peter sandstone unit on the property. The Sandtown property is located 3.1 miles from Highway 167, has an active power line on the property, and is about 14.7 miles away from the nearest rail system. Recent studies suggest that the demand for fine grade sands (particularly 100 Mesh) will continue to increase due to weather-related logistical challenges and unexpectedly high requirements stemming from changes to fracking design. The sandstone at the Property is considered to be of finer mesh than anticipated based on the visual inspection from the current drilling. Select Sands has drilled three diamond drill holes and is currently drilling the fourth. Drill hole ST14-03, 960 m to the east of the ST14-01 and ST14-02, intersected 80 feet (ft.) of St. Peter sandstone formation (the target zone) from surface. The first two drill holes (ST14-01 and ST14-02) drilled 28 ft. and 34 ft. of the St. Peter sandstone respectively. These drill holes were not completed to depth due to mechanical issue, but both holes ended in sandstone and remain open to depth. The phase one reconnaissance drill program will test the depth and thickness of the sandstone and will provide an initial indication of mesh size of the frac sand on the Property. The company will test the properties of frac sand as per the ISO 13503-2:2006/API RP 19C Recommended Practice for Measurement of Properties of Proppants Used in Hydraulic Fracturing and Gravel-packing Operations. These properties include sand sphericity and roundness, crush (K Value), acid solubility, turbidity, and SiO2% content.


Stock Quotes

Market data is delayed at least 15 minutes.

Company Lookup
Recently Viewed
CLICF:US $0.06 USD 0.00

CLICF Competitors

Market data is delayed at least 15 minutes.

Company Last Change
No competitor information is available for CLICF.
View Industry Companies

Industry Analysis


Industry Average

Valuation CLICF Industry Range
Price/Earnings NM Not Meaningful
Price/Sales -- Not Meaningful
Price/Book 0.8x
Price/Cash Flow NM Not Meaningful
TEV/Sales -- Not Meaningful

Sponsored Financial Commentaries

Sponsored Links

Report Data Issue

To contact SELECT SANDS CORP, please visit Company data is provided by Capital IQ. Please use this form to report any data issues.

Please enter your information in the following field(s):
Update Needed*

All data changes require verification from public sources. Please include the correct value or values and a source where we can verify.

Your requested update has been submitted

Our data partners will research the update request and update the information on this page if necessary. Research and follow-up could take several weeks. If you have questions, you can contact them at