KYOCERA Connector Products Corporation engages in the research and development, manufacture, and sale of connectors, related tools, and automatic crimping machines in Japan and internationally. The company’s products include FPC/FFC connectors, memory card connectors, wire to wire/board connectors, back plane connectors, shunt connectors, microphone holders, press-fit pins, application tools, board to board connectors, interface connectors, card edge connectors, automotive connectors, power supply connectors, power terminals, and shield locks. Its products are used in various applications, such as cellular phones, notebook-PCs, storage, printers/copiers, digital still cameras, digital video ...
Founded in 1964
KYOCERA Connector Products Corporation Releases "Series 5843" 0.35mm-Pitch Board-To-Board Connector
May 8 13
KYOCERA Connector Products Corporation released "Series 5843," 0.35mm-pitch Board-to-Board Connector, mounted in smartphones, tablet PCs, and other mobile devices. Since the number of components to be mounted is increasing in diversified electronic devices, higher density package is required for using the limited space on the printed circuit board, effectively realizing smaller and thinner products. This newly developed "Series 5843" is narrower than the company's 0.4mm-pitch existing products by 0.05mm, and also a space-saving product with 0.8mm of stacking height (clearance between boards) and 2.4mm wide. The features are: Space-saving realized by 0.35mm of the narrower pitch: 0.35mm-pitch achieved approximately 12.7% reduction in length of the product compared with the 0.4mm-pitch existing products (Series 5804); Wide range of pin counts available from 10 to 120 positions: 10 to 120 positions will be available; realizing good manipulation performance: The locking structure of the mated connectors is the company's proprietary technology, with which nice clicking feeling is obtained in spite of its low-profile, and the contact retention strength against un-mating is enhanced; Best suitable for high-density package: The bottom of the products is insulated to avoid exposure of contacts as much as possible, as well as the company's 0.4mm-pitch existing products such as Series 5802, 5803, 5804, 5805 and etc., which contributes to less limitation in designing pattern layouts right under the connector on a printed circuit board; Resistant to vibration, drop shock, and foreign matters and realizing high contact reliability: Contacts are designed dual side/bite type for more secure at the shock and vibration, and to have "wiping effect" removing foreign matters with its focused stress that achieves the high contacting reliability; 5,000 pieces are packaged in Tape & Reel; and RoHS compliant and Halogen-free.