Teledyne DALSA Announces Electrostatic Actuator IC for MEMS Micro-Mirror Systems BROMONT, QUEBEC -- (Marketwired) -- 03/03/14 -- Editors Note: There is a photo associated with this Press Release. Teledyne DALSA's Semiconductor Foundry, a division of Teledyne Technologies, announced the availability of its DH0485AQ Electrostatic Actuator High Voltage IC. Using proprietary CMOS/DMOS technology, the DH0485AQ's high accuracy, small footprint and low power is designed for portable systems containing MEMS Micro-Mirrors with up to 4 electrodes. This device showcases Teledyne DALSA Semiconductor's suite of product development and manufacturing capabilities for MEMS/CCD/HV-CMOS solutions required by ROADM, WSS, OXC and Integrable Tunable Lasers. "Sophisticated High Voltage design permits us to electrostatically actuate one bi-axial or two uni-axial MEMS Micro-Mirrors up to 240V" said Remi Meingan, Senior Product Manager. "With an internal DC to DC Boost Converter, 16 Bit DAC with SPI Interface and advanced QFN Package, the DH0485AQ is ideal for optical applications using MEMS Micro-Mirrors with 4 electrodes and needing accurate positioning." The DH0485AQ provides a cost-effective solution for Optical MEMS. The DH0485AQ requires a low voltage supply; the High Voltage Output is provided through a DC/DC Boost Converter up to 240V using an external miniaturized surface mount coil. The DH0485AQ is packaged in QFN 33L, 6x6mm, 0.5P and is ROHS compliant. Key Features -- Four independent 16-bit HV Amplifiers up to 240V -- 2-bit Voltage Selector pins allowing 90, 115, 170 and 240V Outputs, via a DC/DC Step-up Converter and Internal Loop Gain -- Standard SPI(R)/3-wire serial interface for DAC programming up to 50MHz -- Low Pass Filter to avoid resonance frequency of MEMS -- Low Noise -- Internal Diode for Temperature Monitoring DH0485AQ samples will be available in Q1 of 2014. Visit the product page or attend OFC/NFOEC 2014, booth 4653 for more details. Located in Bromont, Canada, Teledyne DALSA's pure-play semiconductor foundry has a history of innovation in MEMS, CCDs, and high voltage CMOS. The foundry serves as a manufacturing partner to fabless and fab-lite semiconductor companies with their advanced MEMS or High Voltage Electrostatic Actuator designs. Visit www.teledynedalsa.com/semi/ for more information. Teledyne DALSA, a Teledyne Technologies company, is an international leader in digital imaging and semiconductors with approximately 1,000 employees, headquartered in Waterloo, Canada. Established in 1980, the company designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing MEMS products and services. Visit www.teledynedalsa.com for more information. All trademarks are registered by their respective companies. Teledyne DALSA reserves the right to make changes at any time without notice. To view the photo associated with this press release, please visit the following link: http://www.marketwire.com/library/20140228-DH0485AQ.jpg Contacts: Media Contact: Geralyn Miller Teledyne DALSA +1-519-886-6001 ext. 2187 firstname.lastname@example.org Sales Contact: Teledyne DALSA Semiconductor +1-450-534-2321 x 1448 +1-450-534-3201 (FAX) email@example.com www.teledynedalsa.com/semi
Teledyne DALSA Announces Electrostatic Actuator IC for MEMS Micro-Mirror Systems
Press spacebar to pause and continue. Press esc to stop.