ESCO Pipe Beveling Tool End Preps Offshore Piping Systems

ESCO Pipe Beveling Tool End Preps Offshore Piping Systems 
HOLLISTON, MA -- (Marketwired) -- 01/28/14 --  ESCO Tool has
introduced an upgraded welding end prep tool for machining high
temperature, high pressure pipe used on severe-duty offshore piping
systems and shale pumping stations. 
The MILLHOG(R) Dictator Welding End Prep Tool is an I.D. clamping
pipe milling machine designed for dry-cutting high-temperature,
high-pressure pipe from 4.5" I.D. to 18" O.D. Ideally suited for end
prepping stainless steel and super duplex piping systems, this tool
features a new 3 HP air motor designed for high performance in
environments that have dirty air and high moisture content. 
Easy to clean and maintain the air motor by just removing one screw
to access the rotor & vane assembly, instead of removing the motor
from the tool, the MILLHOG(R) Dictator Welding End Prep Tool develops
4,100 ft.-lbs. of torque at the cutter blade and pulls a continuous
thick chip without cutting oils. Blades are TiN coated and dissipate
heat away from the pipe's surface. 
The MILLHOG(R) Dictator Welding End Prep Tool is priced from
$21,995.00 and is available for rent from $850.00 per week, depending
upon location. 
About ESCO Tool  
For over 50 years, ESCO Tool has worked closely with end-users on the
toughest tube and pipe cutting and end prep applications in the power
generation and metalworking industries. Their experience has allowed
them to invent and manufacture high quality, torque-free end prep
tools that work efficiently and require no special operator training. 
The ESCO product line features their robust line of MILLHOG(R)
welding end prep tools and Air-Powered Saws and specialty mount
systems, High-Speed Hand-Held Bevelers, and accessories. Available
for sale or rent, with 24 hour shipment or less usually available,
these field-proven tools are built tough and precision machined from
the finest materials to make sure that you get your job done
properly, on time, and under budget. 
Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=2505148 
For more information contact: 
ESCO Tool
A Unit of Esco Technologies, Inc.
Matthew Brennan
Marketing Director
75 October Hill Rd.
Holliston, MA 01746
(800) 343-6926 FAX (508) 429-2811
e-mail: matt@escotool.com
www.escotool.com 
 
 
Press spacebar to pause and continue. Press esc to stop.