ESCO C-MILLHOG(R) O.D. Clamping End Prep Tool Now Offered With Electric Motor HOLLISTON, MA -- (Marketwired) -- 09/11/13 -- ESCO Tool has introduced a new electric O.D. clamping end prep tool for use on both thin-wall and heavy-wall tubes with a high percentage of chrome, especially in high purity applications. The ESCO Electric C-MILLHOG(R) O.D. Clamping End Prep Tool has a massive clamp that grips tubing from the outside, evenly distributing the holding power, to assure a chatter-free, precision end prep on both thin-wall and heavy-wall tubes. Featuring a 950 Watt electric motor and requiring no cutting oils, this end prep tool is ideal for use on high-purity piping systems requiring 37-1/2 degrees bevels, flat-facing, J-preps, or orbital welding. Equipped with a ratchet feed which provides over 1" of stroke, the ESCO Electric C-MILLHOG(R) O.D. Clamping End Prep Tool operates on 110/230V and is suitable for prepping stainless steel and most hard to machine alloys. It has a narrow body that fits between 1-1/8" tubes, a working range of 1/2" to 2-1/2", and uses an easy to change block for changing tube sizes. The ESCO Electric C-MILLHOG(R) O.D. Clamping End Prep Tool sells for $4,500.00 and is available for rent in the continental U.S.A. for $250.00 per week. About ESCO Tool For over 50 years, ESCO Tool has worked closely with end-users on the toughest tube and pipe cutting and end prep applications in the power generation and metalworking industries. Their experience has allowed them to invent and manufacture high quality, torque-free end prep tools that work efficiently and require no special operator training. The ESCO product line features their robust line of MILLHOG(R) welding end prep tools and Air-Powered Saws and specialty mount systems, High-Speed Hand-Held Bevelers, and accessories. Available for sale or rent, with 24 hour shipment or less usually available, these field-proven tools are built tough and precision machined from the finest materials to make sure that you get your job done properly, on time, and under budget. Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=2401287 For more information contact: ESCO Tool A Unit of Esco Technologies, Inc. Matthew Brennan Marketing Director 75 October Hill Rd. Holliston, MA 01746 (800) 343-6926 FAX (508) 429-2811 e-mail: firstname.lastname@example.org www.escotool.com
ESCO C-MILLHOG(R) O.D. Clamping End Prep Tool Now Offered With Electric Motor
Press spacebar to pause and continue. Press esc to stop.