Temex Reports Additional Near Surface High Grade Drill Results from Whitney Gold Project

Temex Reports Additional Near Surface High Grade Drill Results from Whitney 
Gold Project 
TORONTO, Sept. 4, 2013 /CNW/ - Temex Resources Corp. (TSX-V: TME, FWB: TQ1) 
("Temex" or "the Company") is pleased to announce additional high grade gold 
intersections on the Upper Hallnor area of the Whitney Project located in 
Timmins, Ontario. These results continue to expand the mineralization with 
very high gold grades over substantial widths clearly demonstrating the 
outstanding potential of the multiple near-surface targets being tested for 
early production start-up opportunities. 
The Hallnor Gold Mine was the highest grade past producing mine in the Timmins 
gold camp yielding 1.7 million ounces of gold at an average grade of 13.7 g/t 
gold. 
Highlights (see Table 1 for downhole depths of significant intersections and 
Table 2 for details on drill hole locations) 


    --  TW13-291: 71.20 g/t gold over 0.70 metres and 8.33 g/t gold
        over 4.50 metres
    --  TW13-299: 72.07 g/t gold over 3.00 metres including 152.00 g/t
        gold over 1.40 metres
    --  TW13-303: 15.83 g/t gold over 3.50 metres including 43.50 g/t
        gold over 0.80 metres
    --  TW13-304: 16.78 g/t gold over 2.20 metres including 41.67 g/t
        gold over 0.80 metres
    --  TW13-305: 6.99 g/t gold over 3.50 metres and 6.40 g/t gold over
        6.90 metres including 24.04 g/t gold over 1.00 metres

"We are once again extremely pleased with the results from the current 
drilling campaign," commented Ian Campbell, President and CEO. "They continue 
to bolster our confidence in the project by demonstrating high grades and 
excellent continuity of multiple near surface structures in the Upper Hallnor 
Mine area. With a strong balance sheet and a focused cost-effective 
management team, we are well positioned to expeditiously advance this high 
grade gold project."

The drill results released today continue to demonstrate the excellent lateral 
and vertical continuity of four closely spaced, parallel gold-bearing 
structures including the VM, 155, 155 North, and 155 South veins that are 
approximately 10 to 50 metres north and south of the Hallnor Main Vein and 
have been identified over a combined strike length of 600 metres. The 
results shown in the attached table occur along a strike length of 400 metres 
length, and from vertical depths ranging from 15 to 125 metres below surface.

During the current approved program, a total of 93 holes have been drilled for 
an aggregate of 9,895 metres; analytical results are pending for 18 holes 
drilled in the past-producing Bonetal Mine and Broulan Reef mine areas. In 
addition, the Company has completed logging and sampling of 32 holes drilled 
for geotechnical investigations of the crown pillar areas at Bonetal and 
Broulan Reef; analytical results are pending for these holes.

Project Update
The Company's immediate objective is to define a first phase of life mine plan 
with high economic return, low capital, and low operating cost gold zones 
capable of generating quick cash flow. Priority high grade, near surface 
such as the 110, VM, Main, 155, 155 North, and 155 South zones have been the 
focus of this portion of the drilling campaign.

With data collected during the current drill program the geological model is 
undergoing additional interpretation focusing on resource optimization of high 
grade structures within the lower grade envelope reported in the NI 43-101 
resource estimate. Engineering mine design work has commenced and is 
examining both open pit and underground mining scenarios for an advanced 
exploration mining program. Environmental and permitting activities have 
also been initiated towards that purpose.

The drill program is also testing near surface, priority gold targets outside 
the current resource limits, extending a further 2 kilometres to the west 
along the mine trend encompassing the past producing Bonetal and Broulan Reef 
Mines. All drilling will be incorporated into future resource estimate 
updates expected later this year.

The Whitney Property is held under a joint venture in which Temex owns 60% and 
is operator, and Goldcorp Canada Ltd. ("Goldcorp") owns 40% (as manager and on 
behalf of the Porcupine Joint Venture, a joint venture between Goldcorp Inc. 
and Goldcorp Canada Ltd.).

Karen Rees, P.Geo., Vice President, Exploration of Temex Resources Corp., is 
the designated qualified person responsible for the preparation of this news 
release.

Table 1. Significant results from drill holes reported in this release  

 __________________________________________________
|   Hole  |From (m)|To (m)|Core Length (m)|Au (g/t)|
|_________|________|______|_______________|________|
|TW13-289 |   24.00| 31.50|           7.50|    2.47|
|_________|________|______|_______________|________|
|including|   24.00| 27.20|           3.20|    5.22|
|_________|________|______|_______________|________|
|TW13-291 |   45.80| 46.50|           0.70|   71.20|
|_________|________|______|_______________|________|
|         |   70.50| 76.00|           5.50|    6.42|
|_________|________|______|_______________|________|
|including|   75.00| 76.00|           1.00|   31.55|
|_________|________|______|_______________|________|
|         |   81.80| 85.70|           3.90|    3.96|
|_________|________|______|_______________|________|
|including|   81.80| 82.60|           0.80|   11.95|
|_________|________|______|_______________|________|
|         |   90.00| 94.50|           4.50|    8.33|
|_________|________|______|_______________|________|
|including|   91.00| 91.50|           0.50|   11.99|
|_________|________|______|_______________|________|
|    and  |   91.50| 92.10|           0.60|   15.46|
|_________|________|______|_______________|________|
|TW13-296 |   37.10| 40.60|           3.50|    2.34|
|_________|________|______|_______________|________|
|         |   93.90| 96.00|           2.10|    2.56|
|_________|________|______|_______________|________|
|TW13-298 |   48.00| 55.30|           7.30|    5.40|
|_________|________|______|_______________|________|
|including|   48.00| 49.00|           1.00|   11.18|
|_________|________|______|_______________|________|
|    and  |   52.00| 55.30|           3.30|    8.30|
|_________|________|______|_______________|________|
|including|   52.00| 53.70|           1.70|   12.90|
|_________|________|______|_______________|________|
|TW13-299 |   38.10| 50.00|          11.90|    1.14|
|_________|________|______|_______________|________|
|including|   43.50| 50.00|           6.50|    1.67|
|_________|________|______|_______________|________|
|         |   72.00| 75.00|           3.00|   72.07|
|_________|________|______|_______________|________|
|including|   73.00| 75.00|           2.00|  107.72|
|_________|________|______|_______________|________|
|including|   73.60| 75.00|           1.40|  152.00|
|_________|________|______|_______________|________|
|TW13-301 |  114.90|116.90|           2.00|    2.15|
|_________|________|______|_______________|________|
|TW13-302 |  132.00|134.40|           2.40|    7.09|
|_________|________|______|_______________|________|
|including|  132.00|133.50|           1.50|   11.07|
|_________|________|______|_______________|________|
|including|  132.50|133.50|           1.00|   14.00|
|_________|________|______|_______________|________|
|TW13-303 |  140.30|143.20|           2.90|    3.34|
|_________|________|______|_______________|________|
|         |  151.00|153.40|           2.40|    3.73|
|_________|________|______|_______________|________|
|         |  159.50|163.00|           3.50|   15.83|
|_________|________|______|_______________|________|
|including|  160.50|163.00|           2.50|   21.98|
|_________|________|______|_______________|________|
|including|  160.50|161.30|           0.80|   43.50|
|_________|________|______|_______________|________|
|including|  162.00|163.00|           1.00|   14.75|
|_________|________|______|_______________|________|
|TW13-304 |   65.80| 68.00|           2.20|   16.78|
|_________|________|______|_______________|________|
|including|   66.80| 67.60|           0.80|   41.67|
|_________|________|______|_______________|________|
|         |  103.00|104.50|           1.50|    5.94|
|_________|________|______|_______________|________|
|         |  109.30|109.60|           0.30|   17.89|
|_________|________|______|_______________|________|
|TW13-305 |   32.00| 37.00|           5.00|    1.04|
|_________|________|______|_______________|________|
|         |   95.50|111.00|          15.50|    4.90|
|_________|________|______|_______________|________|
|including|   96.70|100.20|           3.50|    6.99|
|_________|________|______|_______________|________|
|including|   96.70| 97.20|           0.50|   20.15|
|_________|________|______|_______________|________|
|         |  104.10|111.00|           6.90|    6.40|
|_________|________|______|_______________|________|
|including|  104.50|108.00|           3.50|   10.27|
|_________|________|______|_______________|________|
|including|  105.00|106.00|           1.00|   24.04|
|_________|________|______|_______________|________|
|TW13-308 |  173.20|176.60|           3.40|    1.98|
|_________|________|______|_______________|________|

Notes: Temex has implemented a quality control (QA/QC) program that includes 
insertion of blanks, commercial standards and duplicate core samples in order 
to ensure best practice in sampling and analysis. Drill core samples are cut 
at Temex facilities using a diamond saw with the samples transported by Temex 
personnel in securely sealed bags to a bonded freighting company and from 
there directly to facilities operated by SGS Canada in Sudbury and 
Mississauga, Ontario for preparation and analysis. Core samples are analyzed 
for gold using fire assay on a 30 gram split with an ICP finish. Where 
initial results exceed 3 g/t gold, a second assay is completed on another 30 
gram split using fire assay with a gravimetric finish. As part of in-house 
QA/QC SGS Canada inserted certified gold standards, blanks and pulp duplicate 
samples. Random additional repeats are also analyzed as required. Results from 
all internal QC samples and repeats are reported. Intervals reported are 
core lengths. True widths are unknown at this time.

Table 2. Location details for drill holes reported in this release  

 ____________________________________________________
|        |UTM Easting|UTM Northing|Length|       |   |
|   Hole |           |            |      |Azimuth|Dip|
|        | NAD27 Z17 | NAD27 Z17  | (m)  |       |   |
|________|___________|____________|______|_______|___|
|TW13-289|     489192|     5373536|    90|    335|-75|
|________|___________|____________|______|_______|___|
|TW13-291|     489176|     5373576|   135|    155|-67|
|________|___________|____________|______|_______|___|
|TW13-296|     488951|     5373462|   145|    335|-70|
|________|___________|____________|______|_______|___|
|TW13-298|     488988|     5373494|    90|    155|-45|
|________|___________|____________|______|_______|___|
|TW13-299|     488988|     5373495|    90|    155|-80|
|________|___________|____________|______|_______|___|
|TW13-301|     488900|     5373473|   150|      0|-90|
|________|___________|____________|______|_______|___|
|TW13-302|     488877|     5373386|   159|    335|-65|
|________|___________|____________|______|_______|___|
|TW13-303|     488871|     5373350|   171|    335|-50|
|________|___________|____________|______|_______|___|
|TW13-304|     488841|     5373411|   141|    340|-50|
|________|___________|____________|______|_______|___|
|TW13-305|     488813|     5373523|   132|    160|-48|
|________|___________|____________|______|_______|___|
|TW13-308|     488830|     5373408|   180|    330|-45|
|________|___________|____________|______|_______|___|

About Temex Resources Corp.
Temex is a Canadian based exploration company focusing on its portfolio of 
precious metals properties in the world class mining district of northeastern 
Ontario. Temex (60% interest) is advancing the Timmins Whitney Gold Project, 
in partnership with Goldcorp Canada Ltd. (40% joint venture interest; no 
back-in rights), and exploring the Juby Gold Project (100% Temex).

The Whitney Property has open pit and underground NI 43-101 compliant 
resources on the Upper Hallnor of 3.0 million tonnes at a grade of 2.44 g/t 
gold for 234,300 ounces of gold in the Measured category plus 8.8 million 
tonnes at a grade of 1.97 g/t gold for 555,900 ounces of gold in the Indicated 
category and 4.1 million tonnes at a grade of 1.82 g/t gold for 241,000 ounces 
of gold in the Inferred category at a cut-off grade of 0.30 g/t gold for open 
pit and 2.0 g/t for underground (Note 1).

The Juby Main Zone has NI 43-101 compliant resources of 25.3 million tonnes at 
a grade of 1.28 g/t gold for 1,041,343 ounces of gold in the Indicated 
category and 74.2 million tonnes at a grade of 0.91 g/t gold for 2,174,193 
ounces of gold in the Inferred category, both at a cut-off grade of 0.40 g/t 
gold (Note 2).

Temex also has a NI 43-101 compliant resource for tailings material on its 
Gowganda Silver Project. The tailings piles contain a NI 43-101 compliant 
resource of 1.94 million tonnes grading 47.5 g/t silver for a contained 
resource of 2.96 million ounces of silver in the Indicated category (Note 3).

Notes:

  1. Information regarding the mineral resource estimate on the Upper
     Hallnor is in the Company's news release dated September 5, 2012
     and the technical report filed on SEDAR October 19, 2012.  The
     Mineral Resource Statement was prepared for Temex by P&E Mining
     Consultants Inc. of Brampton, Ontario in accordance with NI 43-101
     by Richard Sutcliffe, PhD, P.Geo., Eugene Puritch, P.Eng., David
     Burga, P.Geo., Yungang Wu, P.Geo., Tracy Armstrong, P.Geo., and
     Antoine Yassa, P.Geo., "independent qualified persons" as defined


 by NI 43-101.
  2. Information regarding the mineral resource estimate on the Juby 


     Main Zone is in the Company's news release dated April 29, 2013
     and the technical report filed on SEDAR June 12, 2013.  The
     Mineral Resource Statement was prepared for Temex by GeoVector
     Management Inc., Ottawa, Ontario in accordance with NI 43-101 by
     Joe Campbell, BSc, P.Geo., Alan Sexton, MSc, P.Geo., and Duncan
     Studd, MSc, "independent qualified persons" as defined by NI


 43-101.
  3. Information regarding the mineral resource estimate in the 


     tailings piles located on the Gowganda Silver Project is in the
     Company's news release dated June 8, 2011 and the technical report
     filed on SEDAR July 21, 2011.  The Mineral Resource Statement was
     prepared for Temex by GeoVector Management Inc., Ottawa, Ontario
     in accordance with NI 43-101 by Allan Armitage, PhD, P.Geol., Alan
     Sexton, MSc, P.Geo., and Joe Campbell, BSc, P.Geo., "independent
     qualified persons" as defined by NI 43-101.

Forward-Looking Information:
This news release contains forward-looking information which is not comprised 
of historical facts. Forward-looking information involves risks, uncertainties 
and other factors that could cause actual events, results, performance, 
prospects and opportunities to differ materially from those expressed or 
implied by such forward-looking information. Forward-looking information in 
this news release includes, but is not limited to, mineral resource estimates, 
and the development of its projects as well as the timing related thereto. 
Factors that could cause actual results to differ materially from such 
forward-looking information include, but are not limited to, general business 
and economic uncertainties, future mineral prices, uncertainties in mineral 
resource estimates and adverse market conditions, as well as those risks set 
out in the Company's public documents filed on SEDAR. Although the Company 
believes that the assumptions and factors used in preparing the 
forward-looking information in this news release are reasonable, undue 
reliance should not be placed on such information, which only applies as of 
the date of this news release, and no assurance can be given that such events 
will occur in the disclosed time frames or at all. The Company disclaims any 
intention or obligation to update or revise any forward-looking information, 
whether as a result of new information, future events or otherwise, other than 
as required by law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that 
term is defined in the policies of the TSX Venture Exchange) accepts 
responsibility for the adequacy or accuracy of this release.

2013-09-04 Whitney Index Map

2013-09-04 Whitney Drill Plan Upper Hallnor 



SOURCE  Temex Resources Corp. 
For more information please visitwww.temexcorp.com or 
email:info@temexcorp.com or phone: 416-862-2246 toll free: 866-373-6287 
PDF available at:  
http://stream1.newswire.ca/media/2013/09/04/20130904_C4052_DOC_EN_30368.pdf 
PDF available at:  
http://stream1.newswire.ca/media/2013/09/04/20130904_C4052_DOC_EN_30369.pdf 
To view this news release in HTML formatting, please use the following URL: 
http://www.newswire.ca/en/releases/archive/September2013/04/c4052.html 
CO: Temex Resources Corp.
ST: Ontario
NI: MNG PCS FIELD  
-0- Sep/04/2013 13:00 GMT
 
 
Press spacebar to pause and continue. Press esc to stop.