OMRON Releases Head Unit for UV Curing System, Improves Illumination by 140% (*1) over Conventional OMRON Product -- Industry's

 OMRON Releases Head Unit for UV Curing System, Improves Illumination by 140%
      (*1) over Conventional OMRON Product -- Industry's Top Class (*2)

PR Newswire

KYOTO, Japan, Aug. 27, 2013

KYOTO, Japan, Aug. 27, 2013 /PRNewswire/ --OMRON Corporation (TSE: 6645, ADR:
OMRNY) announced on August 27 the release on September 2 of the following head
unit series of the UV (ultraviolet) curing system.


-- The UV curing system head unit ZUV -- H__MC series

This new head unit series for the UV curing system improved illumination by
140% compared to our previous models with the same price. The ZUV series has
reduced an environmental impact by adopting LED light sources.

The UV curing system is a system to cure UV curing resin (adhesive) by
irradiating UV light. It is mainly used to bond optical components and
structural elements in manufacturing processes, such as electronic components
and digital appliances.

A lamp system was originally used for the UV curing system, but high power
consumption and the disposal of the mercury lamps that occurs with each
replacement were problems in reducing the environmental impact, since the high
pressure mercury lamp was used for the light source in the lamp system. In
order to solve these problems, OMRON released the UV curing system ZUV series
with an LED light source in 2005, contributing to reduction of the
environmental burden (CO2 and mercury) in the UV curing process.

The newly released head unit uses a new UV LED with much greater brightness,
resulting in the 140% improvement in illumination compared to our previous
models. These increases can shorten irradiation time to cure resin, and
contribute to improving productivity.

The system inherits OMRON's unique heat dissipation structure, "Smart Canyon,"
which has been utilized in the current lineup of head units.

This structure avoids rises in temperature, which directly influences the
service life of the LED. In addition, it also inherits the light control
function that turns off the light when illumination is not needed. This
function extends the service life of the LED and reduces running costs.

(*1) Typical example with ultra light focus lens ZUV-L2H
Under the following conditions: 100% irradiation power, 25 C room temperature,
and with heat sink. Values are for reference only. The illumination varies
depending on factors such as the ambient environment, installation conditions,
the service life of parts, and differences between parts. Continually check
the curing status to ensure that there is room for error in the illumination.

(*2) OMRON Investigation in August 2013.

Main Specifications of Head Unit
Model       ZUV-H20MC/H30MC/H10MC/H25MC/H35MC
Light       Wavelength    365nm*
Source      Class         Class 3B (JIS C 6802 2005)
                          Class 3B (EN60825-1:1994 +A1:2002 +A2:2001)
                          10 to 150 Hz (acceleration 50 m/s2)with a 0.35 mm
Vibration resistance      single amplitude for 8 minutes each in X, Y, and Z
                          directions, 10 times
Shock resistance          150 m/s2 in 6 directions (up/down, right/left,
                          front/back), 3 times each
Ambient temperature range Operating: 5 to 35 C
                          Storage: -10 to 60 C (with no condensation or icing)
Ambient humidity range    Operating/storage: 30% to 85% (with no condensation
                          or icing)
Degree of protection      IEC60529 IP40
Material                  ZUV-H20MC/H25MC: Zinc, aluminum, glass
                          ZUV-H30MC/H10MC/H35MC: Zinc, copper, aluminum, glass
                          ZUV-H20MC/H25MC: Approx.185g (Head unit:approx.100g)
Weight (packed state)     ZUV-H30MC/H35MC: Approx.150g (Head unit:approx. 55g)
                          ZUV-H10MC(0.3m): Approx.180g (Head unit:approx.105g)
                          ZUV-H10MC 2M: Approx.235g (Head unit:approx.160g)
Accessories               Instruction sheet, mounting brackets (with M3
                          screws), warning labels (in English)
* Models are also available with a 385-nm light source wavelength. (Standard
head: ZUV-H21MB/H11MB, diffuse illumination head: ZUV-H26MB)

Headquartered in Kyoto, Japan, OMRON Corporation is a global leader in the
field of automation. Established in 1933, Omron has more than 35,000 employees
in over 35 countries working to provide products and services to customers in
a variety of fields including industrial automation, electronic components,
social systems, healthcare, and the environment. The company has regional head
offices in Singapore (Asia Pacific), Beijing (Greater China), Amsterdam
(Europe, Africa, and the Middle East), Chicago (the Americas), Gurgaon
(India), and Sao Paulo (Brazil). For more information, visit OMRON's website

Yukio Iriguchi
Industrial Components Div. HQ
Industrial Automation Company
OMRON Corporation
Tel: +81-75-344-7022

SOURCE OMRON Corporation

Press spacebar to pause and continue. Press esc to stop.