Diamcor Recovers Additional "Special" Diamonds at Krone-Endora at Venetia

  Diamcor Recovers Additional "Special" Diamonds at Krone-Endora at Venetia

PR Newswire

KELOWNA, BC, July 11, 2013

TSX.V Symbol (DMI)

KELOWNA, BC, July 11, 2013 /PRNewswire/ - Diamcor Mining Inc. (TSX-V.DMI),
(the "Company") an emerging producer of rough diamonds, has recovered two
additional "special" diamonds in the +10.8 carat category from its
Krone-Endora at Venetia Project (the "Project"). The recovery of the two
diamonds, a 15.16 carat and a 13.38 carat, occurred during initial tests
performed on the processing of previously stockpiled material in the +12.0mm
to -28.0mm size fraction through the expanded quarrying and in-field screening
operations at the Project.

"The recovery of additional diamonds of this size confirm the ability of the
Project to produce large diamonds, and the potential positive impact the
processing of larger size fractions can provide going forward", commented Mr.
Dean Taylor, President and Chief Executive Officer of Diamcor. "We will
continue our testing and commissioning efforts on both the expanded quarrying
and in-field screening operations, as well as the main processing plant, with
the goal being the efficient processing of all size fractions in the
long-term", Mr. Taylor added.

Revised / Lower Finder's Fees

The Company also wishes to revise the information previously provided on the
finder's fee compensation in its news release of June 17, 2013, with respect
to the closing of its non-brokered private placement (the "Offering"). It was
originally announced that the Company would pay total finder's fees of
$30,682.40 in cash on an aggregate of $438,320 invested under the Offering,
and would issue an aggregate of 24,546 broker warrants exercisable to purchase
up to 24,546 common shares ("Shares") of the Company at a price of $1.75 per
Share until June 17, 2016. The finder's fee amounts have been revised and
lowered, with a total finder's fee amount of $28,932.40 in cash payable on an
aggregate of $413,320 invested, and an aggregate of 23,146 broker warrants
exercisable to purchase up to 23,146 Shares of the Company at a price of $1.75
per Share until June 17, 2016. The total gross proceeds of the private
placement remains at $1,984,730.

About Diamcor Mining Inc.

Diamcor Mining Inc. is a fully reporting publically traded junior diamond
mining company which is listed on the TSX Venture Exchange under the symbol
V.DMI, and on the OTC QX International under the symbol DMIFF. The Company
has a well-established operational and production history in South Africa,
extensive experience supplying rough diamonds to the world market, and has
established a long-term strategic alliance with world famous Tiffany & Co.
Rather than exposing itself to the high risks and costs associated with
exploration, the Company's focus is on the identification, acquisition, and
operation of unique diamond projects with near-term production potential such
as the Krone-Endora at Venetia Project. For additional information on
Diamcor, please visit our website at www.diamcormining.com.

About the Tiffany & Co. Alliance

As announced on March 29, 2011, the Company has established a long-term
strategic alliance and first right of refusal with Tiffany & Co. Canada, a
subsidiary of world famous New York based Tiffany & Co., to purchase up to
100% of the future production of rough diamonds from the Krone-Endora at
Venetia Project at then current prices to be determined by the parties on an
ongoing basis. In conjunction with this first right of refusal, Tiffany & Co.
Canada also provided the Company with substantial financing to advance the
Project as quickly as possible. Tiffany & Co. is a publically traded company
which is listed on the New York Stock Exchange under the symbol TIF. Founded
in 1837, the Tiffany name is now globally recognised as one of the premier
luxury jewellery and specialty retailers in the world. Through Tiffany & Co.
and various other subsidiaries, the company is engaged in product design,
manufacturing, and retailing activities on a global basis. As of January
2013, Tiffany & Co. operated 275 stores and boutiques in the Americas, Japan,
Asia-Pacific, Europe and the United Arab Emirates, and also engages in direct
selling through internet, catalog and business gift operations. For additional
information on Tiffany & Co., please visit their website at www.tiffany.com.

About Krone-Endora at Venetia

In February 2011, Diamcor acquired the Krone-Endora at Venetia Project from De
Beers Consolidated Mines Limited, consisting of the prospecting rights over
the farms Krone 104 and Endora 66, which represent a combined surface area of
approximately 5,888 hectares directly adjacent to De Beers' flagship Venetia
Diamond Mine in South Africa. De Beers previously completed various
exploration efforts on initial areas of interest comprised of approximately
307 hectares, a summary of which was reported in an initial Independent NI
43-101 Technical Report filed by the Company on July 30, 2009. The deposits
which occur on the properties of Krone and Endora have been identified as a
rare, higher-grade "Alluvial" basal deposit which is covered by a lower-grade
upper "Eluvial" deposit. The deposits are proposed to be the result of the
direct-shift (in respect to the "Eluvial" deposit) and erosion (in respect to
the "Alluvial" deposit) of an estimated combined 1,000 m (1 km) of material
from the higher grounds of the adjacent Venetia Kimberlite areas. The deposits
on Krone-Endora occur in two layers with an average total depth of less than
15.0 metres from surface to bedrock, allowing for a very low-cost mining
operation to be employed with the potential for near-term diamond production
from a known high-quality source. Krone-Endora also benefits from the
significant development of infrastructure and services already in place due to
its location directly adjacent to the Venetia Mine. Since acquiring
Krone-Endora the Company has completed the construction and installation of
extensive infrastructure at the Project, along with the installation of a
purpose built modular processing plant, and extensive quarrying and in-field
screening operations. Commissioning of the processing plant is now complete,
and the Company's current efforts are designed to be a continuation of the
ongoing advancement of the Project, and as part of the Company's final
preparations in anticipation of a planned move to 24/7 operations in the near

Qualified Person Statement:

Mr. James  P. Hawkins  (BSc.,  P.Geo), is  Manager  of Exploration  &  Special 
Projects for Diamcor Mining Inc., and the Qualified Person in accordance  with 
National  Instrument  43-101  responsible  for  overseeing  the  execution  of 
Diamcor's  exploration  programmes  and  a   Member  of  the  Association   of 
Professional Engineers, Geologists, and  Geophysicists of Alberta  ("APEGA"). 
Mr. Hawkins has reviewed this press release and approved of its contents.

On behalf of the Board of Directors

Mr. Dean H. Taylor
President & CEO
Diamcor Mining Inc.
Tel (250) 864-3326

Investor Relations Contact:
Justin Vaicek
Liolios Group, Inc.
Tel (949) 574-3860

This press release contains  certain forward-looking statements. While  these 
forward-looking statements  represent our  best  current judgement,  they  are 
subject to a variety of risks and uncertainties that are beyond the  Company's 
ability to control or predict and  which could cause actual events or  results 
to  differ  materially   from  those  anticipated   in  such   forward-looking 
statements. Further, the Company expressly disclaims any obligation to update
any forward looking statements. Accordingly,  readers should not place  undue 
reliance on forward-looking statements.

                             WE SEEK SAFE HARBOUR

  Neither TSX Venture Exchange nor its Regulation Services Provider (as that
       term is defined in policies of the TSX Venture Exchange) accepts
         responsibility for the adequacy or accuracy of this release.

SOURCE Diamcor Mining Inc.


Investor Relations Contact:
Justin Vaicek
Liolios Group, Inc.
Tel (949) 574-3860
Press spacebar to pause and continue. Press esc to stop.