IDT Introduces World's Lowest Jitter Synchronous Ethernet-compliant Single-chip Timing Solutions

  IDT Introduces World's Lowest Jitter Synchronous Ethernet-compliant
  Single-chip Timing Solutions

   IDT Reduces Jitter by Over 50% Versus Competing Solutions and Offers the
Industry’s First SyncE-compliant Solution that Meets the Most Stringent 10G or
                    40G Ethernet Performance Requirements

Business Wire

SAN JOSE, Calif. -- June 27, 2013

Integrated Device Technology, Inc. (IDT^®) (NASDAQ: IDTI), the Analog and
Digital Company™ delivering essential mixed-signal semiconductor solutions,
today announced the world’s lowest jitter ITU-T G.8262-compliant Synchronous
Ethernet (SyncE) timing solutions. The new IDT 82V3910 is the first
carrier-class SyncE-compliant phase-locked loop (PLL) device capable of
meeting the most stringent 10G or 40G Ethernet PHY jitter performance
requirements. With phase jitter below 300 femtoseconds (fs) RMS over the
10kHz to 20MHz integration range (with all channels in operation), this
single-chip device offers 50 percent less jitter than competing solutions and
replaces multichip alternatives to reduce design complexity and cost.

The IDT 82V3910 and 82V3911 are low-jitter, highly-versatile SyncE network
timing solutions optimized for use in 10GBASE-R/10GBASE-W and 40GBASE-R
applications, including switches, routers, multiservice switching platforms,
wireless backhaul equipment and other communications infrastructure. The
innovative high-integration architecture includes two independent digital PLLs
(DPLLs) to allow bidirectional synchronization for maximum utility and
simplified deployment. The DPLLs lock to a wide variety of telecom and
Ethernet reference frequencies and suppress incoming timing faults to generate
highly-reliable output clocks for optimal network performance.

“Our latest SyncE network timing devices combine IDT’s industry-leading
digital and analog PLL technologies to achieve the first integrated
synchronization solution addressing the large and fast-growing market for 10G
and 40G applications,” said Christian Kermarrec, vice president and general
manager of the Timing and Synchronization Division at IDT. “With jitter less
than half that of competing products, the new clocking solutions offer our
customers the ultimate in performance and versatility by supporting the most
stringent low-jitter requirements found in 10G or 40G Ethernet applications.
These devices complement IDT’s rich timing portfolio, including RF and network
PLLs, VCXOs, synthesizers, buffers, frequency translators and crystal
oscillator replacement products.”

The IDT 82V3910 SyncE SETS simplifies the timing circuit and bill-of-materials
(BOM) by providing the synchronous equipment timing source (SETS) function to
manage all required synchronization timing signals. Ultra-low jitter
generation makes the 82V3910 particularly suitable for single-board systems
where the SETS directly times 10G or 40G network PHYs. The 82V3910 complies
with ITU-T G.8262 for EEC-Options 1 and 2; and G.813 for SEC-Options 1 and 2;
and is suitable for SyncE, SONET and SDH equipment. The 82V3910 can
synchronize directly to a one pulse per second (1 PPS) reference enabling the
host system to use a low-cost GPS receiver.

The single-chip 82V3911 SyncE PLL is pre-engineered to select references from
a variety of SETS or network sources, perform clock rate conversions, and
attenuate jitter – all while preserving the G.8262 compliance of the selected
references. Furthermore, the 82V3911 reduces timing circuit BOM cost and board
space by providing two PLL channels in a single chip.

Pricing and Availability

The IDT 82V3910 and 82V3911 are available now and are encapsulated in a
196-ball 15 x 15mm CABGA Package. The IDT 82V3910 and 82V3911 are priced at
$35.20 and $25.50 each for volumes of 1,000 units, respectively. For more
information about IDT’s leading clock ICs and timing solutions, please visit
www.idt.com/go/timing.

About IDT Clock and Timing Solutions

With a product portfolio 10 times greater and broader than any other, IDT is
the world’s leader in silicon timing and is in a unique position to address
the needs of virtually any application. With the industry’s largest market
share, IDT is the only one-stop-shop for timing, offering products from
full-featured system solutions to simple clock building-block devices.
Factory-programmable options and clock solution customization capabilities
address unique customer requirements, while the lowest jitter and lowest power
features set IDT apart from the competition. Products are accompanied by a
world-class support team driven by service and responsiveness goals. IDT has
also expanded its portfolio to include frequency control products, such as the
XpressO^® oscillators from Fox Electronics and an innovative line of MEMS
oscillators that are rapidly replacing legacy quartz-based oscillators. For
more information about IDT’s leading portfolio of timing products, please
visit www.idt.com/go/timing.

About IDT

Integrated Device Technology, Inc., the Analog and Digital Company™, develops
system-level solutions that optimize its customers’ applications. IDT uses its
market leadership in timing, serial switching and interfaces, and adds analog
and system expertise to provide complete application-optimized, mixed-signal
solutions for the communications, computing and consumer segments.
Headquartered in San Jose, Calif., IDT has design, manufacturing, sales
facilities and distribution partners throughout the world, with direct
purchase services through IDT Direct™. IDT stock is traded on the NASDAQ
Global Select Stock Market® under the symbol “IDTI.” Additional information
about IDT is accessible at www.IDT.com. Follow IDT on Facebook, LinkedIn,
Twitter, and YouTube.

  IDT and the IDT logo are trademarks or registered trademarks of Integrated
 Device Technology, Inc. All other brands, product names and marks are or may
 be trademarks or registered trademarks used to identify products or services
                         of their respective owners.

Photos/Multimedia Gallery Available:
http://www.businesswire.com/multimedia/home/20130627005103/en/

Multimedia
Available:http://www.businesswire.com/cgi-bin/mmg.cgi?eid=50660577&lang=en

Contact:

IDT Corporate Marketing
Sue Kim, 408-284-2739
sue.kim@idt.com