Duluth Metals Highlights 110 Feet of 0.94% Copper, 0.31% Nickel and 1.17 Grams TPM at Maturi West in the Twin Metals Minnesota

Duluth Metals Highlights 110 Feet of 0.94% Copper, 0.31% Nickel and 1.17 Grams
           TPM at Maturi West in the Twin Metals Minnesota Project

  PR Newswire

  TORONTO, April 16, 2013

TORONTO, April 16, 2013 /PRNewswire/ --

  *Drill results of the first 20 holes (MSW-0001 to MSW-0020) in the Maturi
    West Exploration Target Area west and south of the Maturi deposit and up
    dip from the Birch Lake deposit in the Twin Metals Minnesota Project
  *TMM initiated this drilling program to evaluate the area for potential
    additional resources that may be used to enhance early production rates.
  *The AMEC 2012 Technical Report ^[ ^1 ^] outlined four Exploration Targets
    areas surrounding and adjacent to the Maturi and Birch Lake deposits.
    These four Exploration Target areas occur on approximately 12% of the
    footprint of the prospective portion of the Twin Metals Minnesota property
    block.

Duluth Metals Limited ("Duluth Metals") (TSX: DM) (TSX: DM.U) is pleased to
announce assay results for the first 20 holes, MSW-0001 to MSW-0020, in the
Maturi West Exploration Target area, including the up dip extension of the
Birch Lake deposit, within the Twin Metals Minnesota Project ("TMM") in
northeastern Minnesota. Assay results from the relatively shallow drilling
highlight thick mineralized intersections which include:

  *MSW-0014 returned a 150 foot intersection of 0.81% copper, 0.27% nickel,
    2.7 g/t silver and 1.00 grams TPM (TPM = Platinum+Palladium+Gold) at a
    0.3% Cu cut-off including a 110 foot intersection of 0.94% copper, 0.31%
    nickel, 3.1 g/t silver and 1.17 grams TPM at a 0.5% Cu cut-off;
  *MSW-0017 returned a 210.5 foot intersection of 0.64% copper, 0.24% nickel,
    2.1 g/t silver and 0.35 grams TPM at a 0.3% Cu cut-off including a 120.5
    foot intersection of 0.72% copper, 0.24% nickel, 2.6 g/t silver and 0.44
    grams TPM at a 0.5% Cu cut-off; and
  *MSW-0018 returned a 83 foot intersection of 0.60% copper, 0.19% nickel,
    2.1 g/t silver and 0.41 grams TPM at a 0.3% Cu cut-off including a 50 foot
    intersection of 0.90% copper, 0.28% nickel, 3.7 g/t silver and 0.51 grams
    TPM at a 0.5% Cu cut-off.

"We are pleased with the assay results which confirm the existence of
mineralization at shallow depths between the Maturi Deposit and the Birch Lake
Deposit." stated Vern Baker, President of Duluth Metals. "These results show
an opportunity to enhance the economics of the project by increasing
production rates in the mining plan."

^[ ^1 ^] Full independent NI 43-101 Technical Report completed by AMEC E&C
Services Inc. (AMEC) by a team led by Dr. Harry Parker entitled "Maturi , 
Birch Lake ,  and Spruce Road Cu-Ni-PGE Projects ,  Ely ,  Minnesota , 
USA ,  NI 43-101 Technical Report" with an effective date of 15 September
2012 is filed on SEDAR ( http://www.sedar.com ).

Figure 1 is a map illustrating the location of 20 drill holes reported in this
press release which can be found on the Company website under this press
release at http://www.duluthmetals.com .

A more detailed summary of the assay results for MSW-0001 to MSW-0020 can be
found in Tables 1 and 2 below. True thickness is estimated at about 90% of
core length:

Table 1: Maturi Southwest Results Summary


      HOLE    Zone                       From   To   Length  Cu   Ni   TPM
                                         (ft)  (ft)   (ft)  (%)  (%)  (g/t)
    MSW-0001  @0.3% Cu cut-off           334    369    35.0 0.38 0.12  0.22
    MSW-0002  @0.3% Cu cut-off          188.5  486.6  298.1 0.46 0.16  0.24
    including @0.5% Cu cut-off           193    248    55.0 0.77 0.27  0.47
    MSW-0003  @0.5% Cu cut-off           1057  1117    60.0 0.53 0.16  0.25
    MSW-0004  @0.3% Cu cut-off           857   1042   185.0 0.49 0.18  0.31
    including @0.5% Cu cut-off           952   1007    55.0 0.63 0.21  0.37
    MSW-0005  @0.3% Cu cut-off           148    353   205.0 0.51 0.15  0.35
    including @0.5% Cu cut-off           218    288    70.0 0.90 0.23  0.64
              @0.3% Cu cut-off           683    743    60.0 0.42 0.13  0.15
    MSW-0006  @0.3% Cu cut-off           513    693   180.0 0.53 0.17  0.39
    including @0.5% Cu cut-off           513    613   100.0 0.65 0.21  0.52
    MSW-0007  @0.3% Cu cut-off           663    843   180.0 0.43 0.14  0.23
    including @0.5% Cu cut-off           768    798    30.0 0.78 0.24  0.39
    MSW-0008  @0.3% Cu cut-off          14.25   92     77.8 0.65 0.20  0.43
    including @0.5% Cu cut-off          14.25   77     62.8 0.71 0.22  0.47
              @0.3% Cu cut-off           202    272    70.0 0.43 0.15  0.25
    MSW-0009  @0.3% Cu cut-off          200.25  338   137.8 0.50 0.19  0.38
              @0.3% Cu cut-off           403    463    60.0 0.47 0.17  0.20
    MSW-0010  @0.3% Cu cut-off           817    977   160.0 0.49 0.19  0.38
    MSW-0011  @0.3% Cu cut-off           1251  1526   275.0 0.42 0.13  0.22
    MSW-0012  @0.3% Cu cut-off           118    173    55.0 0.79 0.30  0.46
    MSW-0013  @0.3% Cu cut-off           732    837   105.0 0.56 0.17  0.50
    including @0.5% Cu cut-off           742    797    55.0 0.81 0.27  0.81
    MSW-0014  @0.3% Cu cut-off           214    364   150.0 0.81 0.27  1.00
    including @0.5% Cu cut-off           214    324   110.0 0.94 0.31  1.17
    MSW-0015  @0.3% Cu cut-off            98    293   195.0 0.37 0.12  0.22
    MSW-0016  no significant intercepts
    MSW-0017  @0.3% Cu cut-off          958.5  1169   210.5 0.64 0.24  0.35
    including @0.5% Cu cut-off          958.5  1079   120.5 0.72 0.24  0.44
    MSW-0018  @0.5% Cu cut-off           598    648    50.0 0.90 0.28  0.51
              @0.3% Cu cut-off           673    756    83.0 0.60 0.19  0.41
    MSW-0019  @0.3% Cu cut-off            14    33     19.0 0.58 0.20  0.41
    MSW-0020  @0.5% Cu cut-off           414    639   225.0 0.68 0.25  0.51

(*TPM = Platinum+Palladium+Gold) 

Table 2: Complete platinum ,  palladium ,  gold ,  cobalt and silver
assays.


      HOLE         Zone        From   To   Length  Pt    Pd    Au    Co   Ag
                               (ft)  (ft)   (ft)  (g/t) (g/t) (g/t) (%)  (g/t)
                     @0.3% Cu
    MSW-0001          cut-off  334    369    35.0  0.06  0.12  0.04 0.01   1.2
                     @0.3% Cu
    MSW-0002          cut-off 188.5  486.6  298.1  0.06  0.14  0.04 0.01   1.5
                     @0.5% Cu
    including         cut-off  193    248    55.0  0.12  0.28  0.07 0.01   2.7
                     @0.5% Cu
    MSW-0003          cut-off  1057  1117    60.0  0.06  0.15  0.04 0.01   1.7
                     @0.3% Cu
    MSW-0004          cut-off  857   1042   185.0  0.08  0.18  0.05 0.01   1.5
                     @0.5% Cu
    including         cut-off  952   1007    55.0  0.09  0.22  0.06 0.01   1.9
                     @0.3% Cu
    MSW-0005          cut-off  148    353   205.0  0.12  0.17  0.05 0.01   1.5
                     @0.5% Cu
    including         cut-off  218    288    70.0  0.27  0.29  0.08 0.02   2.7
                     @0.3% Cu
                      cut-off  683    743    60.0  0.03  0.09  0.04 0.01   1.4
                     @0.3% Cu
    MSW-0006          cut-off  513    693   180.0  0.11  0.23  0.06 0.01   1.7
                     @0.5% Cu
    including         cut-off  513    613   100.0  0.14  0.30  0.08 0.01   2.1
                     @0.3% Cu
    MSW-0007          cut-off  663    843   180.0  0.06  0.14  0.03 0.01   1.4
                     @0.5% Cu
    including         cut-off  768    798    30.0  0.10  0.25  0.05 0.01   2.7
                     @0.3% Cu
    MSW-0008          cut-off 14.25   92     77.8  0.09  0.26  0.08 0.01   2.0
                     @0.5% Cu
    including         cut-off 14.25   77     62.8  0.10  0.28  0.08 0.01   2.2
                     @0.3% Cu
                      cut-off  202    272    70.0  0.07  0.14  0.04 0.01   1.2
                     @0.3% Cu
    MSW-0009          cut-off 200.25  338   137.8  0.10  0.22  0.06 0.01   1.9
                     @0.3% Cu
                      cut-off  403    463    60.0  0.05  0.11  0.04 0.01   1.5
                     @0.3% Cu
    MSW-0010          cut-off  817    977   160.0  0.11  0.21  0.06 0.01   1.7
                     @0.3% Cu
    MSW-0011          cut-off  1251  1526   275.0  0.05  0.13  0.03 0.01   1.3
                     @0.3% Cu
    MSW-0012          cut-off  118    173    55.0  0.12  0.26  0.08 0.03   2.5
                     @0.3% Cu
    MSW-0013          cut-off  732    837   105.0  0.13  0.30  0.08 0.01   2.4
                     @0.5% Cu
    including         cut-off  742    797    55.0  0.20  0.48  0.12 0.02   4.2
                     @0.3% Cu
    MSW-0014          cut-off  214    364   150.0  0.26  0.58  0.15 0.01   2.7
                     @0.5% Cu
    including         cut-off  214    324   110.0  0.31  0.68  0.18 0.01   3.1
                     @0.3% Cu
    MSW-0015          cut-off   98    293   195.0  0.06  0.13  0.03 0.01   0.6
               no significant
    MSW-0016       intercepts
                     @0.3% Cu
    MSW-0017          cut-off 958.5  1169   210.5  0.09  0.21  0.05 0.01   2.1
                     @0.5% Cu
    including         cut-off 958.5  1079   120.5  0.11  0.27  0.06 0.01   2.6
                     @0.5% Cu
    MSW-0018          cut-off  598    648    50.0  0.12  0.31  0.08 0.01   3.7
                     @0.3% Cu
                      cut-off  673    756    83.0  0.10  0.25  0.06 0.01   2.1
                     @0.3% Cu
    MSW-0019          cut-off   14    33     19.0  0.12  0.21  0.08 0.01   2.1
                     @0.5% Cu
    MSW-0020          cut-off  414    639   225.0  0.14  0.29  0.08 0.01   2.2

The Twin Metals Minnesota Project covers over 32,000 acres of land/mineral
interests and consolidates the largest base and precious metal land position
in Minnesota. This extensive land position provides Twin Metals with the
platform to plan and develop one the world's largest copper-nickel-PGM
deposits within a new emerging mining belt in Minnesota, USA.

For the 2013 Drill Program, half core samples are being prepared at ALS
Minerals laboratories in Thunder Bay and then shipped to its analytical
facilities in Vancouver. Samples are being analyzed for Au, Pt, and Pd using a
30g standard fire assay with an ICP-AES finish and for 33 other elements using
a four acid (near total) digestion and a combination of ICP-MS and ICP-AES.
ICP over-limits for copper and nickel are re-analyzed using dissolution four
acid (near total) digestion followed by ICP-AES or AAS. The remaining half
core samples are being stored in Minnesota.

Phillip Larson, P. Geo. is the Qualified Person for Duluth Metals and Senior
Geologist for Duluth Metals, in accordance with NI 43-101 of the Canadian
Securities Administrators, and is responsible for Duluth Metals technical
content of this press release and quality assurance of the exploration data
and analytical results.

About Duluth Metals Limited

Duluth Metals Limited is committed to acquiring, exploring and developing
copper, nickel and platinum group metal (PGM) deposits. Duluth Metals has a
joint venture with Antofagasta plc on the Twin Metals Minnesota Project,
located within the rapidly emerging Duluth Complex mining camp in
north-eastern Minnesota. The Duluth Complex hosts one of the world's largest
undeveloped repositories of copper, nickel and PGMs, including the world's
third largest accumulation of nickel sulphides, and one of the world's largest
accumulations of polymetallic copper and platinum group metals. Aside from the
joint venture, Duluth Metals retains a 100% position on approximately 40,000
acres of mineral interests on exploration properties adjacent to and nearby
the Twin Metals Minnesota LLC joint venture.

About Twin Metals Minnesota LLC

Twin Metals Minnesota, LLC, is a joint venture company, 60 percent owned by
Duluth Metals Limited and 40 percent by Antofagasta plc. Twin Metals was
formed in 2010 to pursue the development and operation of a copper, nickel and
platinum group metals (strategic metals) underground mining project within the
Duluth Complex in northeastern Minnesota. Twin Metals holds mineral and land
assets of approximately 32,000 acres of leased and permitted land, including
mineral resources prepared in compliance with the requirements of NI 43-101.

This press release contains forward-looking statements (including
"forward-looking information" within the meaning of applicable Canadian
securities legislation and "forward-looking statements" within the meaning of
the US Private Securities Litigation Reform Act of 1995) relating to ,  among
other things ,  the results of drilling operations of Duluth Metals and
exploration and mine development.  Generally ,  forward-looking statements
can be identified by the use of words such as "plans" ,  "expects" or "does
not expect" ,  "is expected" ,  "budget" ,  "scheduled" ,  "estimates" , 
"forecasts" ,  "intends" ,  "anticipates" or "does not anticipate" ,  or
"believes" ,  or variations of such words and phrases or statements that
certain actions ,  events or results "may" ,  "could" ,  "would" , 
"might" or "will be taken" ,  "occur" or "be achieved".  Duluth Metals has
relied on a number of assumptions and estimates in making such forward-looking
statements ,  including ,  without limitation ,  the prices of copper , 
nickel and platinum group metals (PGMs) and the costs associated with
continuing exploration and mining development.  Such assumptions and
estimates are made in light of the trends and conditions that are considered
to be relevant and reasonable based on information available and the
circumstances existing at this time. A number of risk factors may cause actual
results ,  level of activity ,  performance or outcomes of such exploration
and/or mine development to be materially different from those expressed or
implied by such forward-looking statements including ,  without limitation ,
 whether such discoveries will result in commercially viable quantities of
such mineralized materials ,  the possibility of changes to project
parameters as plans continue to be refined ,  the ability to execute planned
exploration and future drilling programs ,  possible variations of copper , 
nickel and PGM grade or recovery rates ,  the need for additional funding to
continue exploration efforts ,  changes in general economic ,  market and
business conditions ,  and those other risks set forth in Duluth Metals' most
recent annual information form under the heading "Risk Factors" and in its
other public filings.  Statements related to "reserves" and "resources" are
deemed forward-looking statements as they involve the implied assessment , 
based on realistically assumed and justifiable technical and economic
conditions ,  that an inventory of mineralization will become economically
extractable.  Forward-looking statements are not guarantees of future
performance and such information is inherently subject to known and unknown
risks ,  uncertainties and other factors that are difficult to predict and
may be beyond the control of Duluth Metals.  Although Duluth Metals has
attempted to identify important risks and factors that could cause actual
actions ,  events or results to differ materially from those described in
forward-looking statements ,  there may be other factors and risks that cause
actions ,  events or results not to be as anticipated ,  estimated or
intended.  Consequently ,  undue reliance should not be placed on such
forward-looking statements. In addition ,  all forward-looking statements in
this press release are given as of the date hereof.  Duluth Metals disclaims
any intention or obligation to update or revise any forward-looking statements
,  whether as a result of new information ,  future events or otherwise , 
save and except as may be required by applicable securities laws.  The
forward-looking statements contained herein are expressly qualified by this
disclaimer.

Image with caption: "Figure 1 is a map illustrating the location of 20 drill
holes reported in this press release which can also be found on the Company
website under this press release at http://www.duluthmetals.com . (CNW
Group/Duluth Metals Limited)". Image available at:
http://photos.newswire.ca/images/download/20130416_C5685_PHOTO_EN_25558.jpg

For further information:Mara Strazdins Vice President Investor Relations and
Corporate Communications Telephone: +1-(416)-369-1500 ext. 222 Email:
mstrazdins@duluthmetals.com Vern Baker President Telephone: +1-(651)-389-9990
Email: vbaker@duluthmetals.com Webpage:  http://www.duluthmetals.com
 
Press spacebar to pause and continue. Press esc to stop.