Zacks Industry Outlook Highlights: ArcelorMittal, United States Steel, Nucor, AK Steel and Nippon Steel & Sumitomo Metal

Zacks Industry Outlook Highlights: ArcelorMittal, United States Steel, Nucor,
                  AK Steel and Nippon Steel & Sumitomo Metal

PR Newswire

CHICAGO, Feb. 15, 2013

CHICAGO, Feb. 15, 2013 /PRNewswire/ --Today, Zacks Equity Research discusses
the U.S. Metals & Mining, including ArcelorMittal (NYSE:MT), United States
Steel (NYSE:X), Nucor (NYSE:NUE), AK Steel (NYSE:AKS) and Nippon Steel &
Sumitomo Metal Corporation (OTC:NSSMY).


A synopsis of today's Industry Outlook is presented below. The full article
can be read at 


The automotive and construction markets have historically been the largest
consumers of steel. The automotive sector has been promising in recent times.
Auto sales in the U.S. surged 13% to 14.5 million vehicles in Dec 2012, the
highest volume attained in the last five years. The seasonally adjusted annual
rate (SAAR) in December was 15.4 million vehicles, the second straight month
of above 15 million SAAR in 2012. This performance will likely generate solid
momentum going into 2013.

The robust growth rate in the sector has been fueled by strong pent-up demand,
cheap financing, launch of several redesigned and fuel-efficient vehicles and
rebound in consumer confidence thanks to a growing belief that the housing
market is recovering.

Another major market, the construction sector, has so far been a drag on the
steel companies' earnings. However, in 2012, the sector finally started
picking up began signaling a recovery evidenced by solid growth in the major

The architecture billing index (ABI), an economic indicator that provides an
approximate nine- to twelve-month glimpse into the future of non-residential
construction spending activity, climbed back into the positive territory with
a score of 50.2 in August after languishing in the negative territory for five
consecutive months. Any score above 50 indicates an increase in billings and
the score has remained stable till December.

The ABI readings in the fourth quarter of 2012, in fact, exhibited the
strongest growth since the downturn in early 2008. This momentum is expected
to persist and conditions are expected improve, albeit at a slow and steady

The American Institute of Architects projects a 5% increase in spending in
2013 for non-residential construction projects, on the back of higher
construction of commercial facilities, particularly for hotels followed by
industrial construction spending. The spending is expected to shore up to 7.2%
in 2014.

Meanwhile, the residential housing sector is also showing signs of positive
growth with figures at highest levels in more than four years. In 2012,
housing starts totaled 780,000, surging 28% from 2011 and housing permits (an
indicator of future demand) escalated 30% to 813,000. Both attained their
respective highest level since 2008. Housing completions rose 11% to 651,000
in 2012, the highest level since 2010.

According to the most recent most issued data, in December housing starts
spiked 37% year over year to a seasonally adjusted annual rate of 954,000.
Building permits were at a seasonally adjusted annual rate of 903,000, 29%
higher than the year-ago figure.

In a nutshell, record-low mortgage rates, rising rents and reduced prices of
properties are luring buyers. These figures reinforce the belief that U.S.
residential construction is finally stabilizing and is on the road to a much
awaited recovery.

Analyzing the fourth quarter results of the major steel companies in our
coverage -- ArcelorMittal (NYSE:MT), United States Steel (NYSE:X), Nucor
(NYSE:NUE) and AK Steel (NYSE:AKS) -- we see revenues were marred by the drop
in average steel prices. This does not come as a surprise as oversupply in the
U.S. steel industry and increased steel imports in the domestic market
affected steel prices, which in turn hurt margins and profits of the steel
players. Furthermore, the gloomy macroeconomic condition in Europe is another
area of concern as it is the largest market for total U.S. exports.

Given the scenario in Europe, ArcelorMittal, the world's largest steelmaker in
terms of volume and Europe's largest steelmaker, recently announced its plans
to permanently close its plant in Liege, Belgium owing to the slack demand and
weakening European economy. The company also announced the idling of its
liquid phase in Oct 2011 due to structural over-capacity in Northern Europe.
The production halt at the Liege plant was done to better focus on the
company's downstream activities, operating five core lines and seven flexible

However, economic conditions worsened since then and demand for steel in
Europe declined another 8%-9% in 2012 and is currently 29% below the
pre-crisis levels. The Leige business is heavily dependent on the automotive
sector, which faced a major downturn in 2012. Consequently, tepid demand also
had a hand in idling of the facility and ArcelorMittal further stated that it
will close six production lines at Liege that manufacture finished steel
products for the auto industry. It is also closing a coke plant, which
produces fuel for blast furnaces.

Going into 2013, steelmakers expect profits to be affected by continued
increase in steel imports, volatility in steel pricing along with
macroeconomic uncertainty stemming from the recessionary conditions in Europe
and sluggish growth in the emerging markets.

However, the sector will benefit from the strong momentum in the automotive
markets. The outlook for other key markets -- transportation, energy,
industrial and agricultural sectors also remains favorable. The turnaround in
the so-far faltering construction sector will definitely provide a much-needed
impetus to the sector.

Steelmakers are increasing their consolidation efforts, particularly in China
and India, to derive economies of scale and other synergies to remain
competitive. A major development in this sector was the recent merger of
Japan's largest and the world's sixth-largest steel maker Nippon Steel
Corporation with Sumitomo Metal Industries to form the world's second biggest
steel firm -- Nippon Steel & Sumitomo Metal Corporation (OTC:NSSMY). With a
combined capacity of 46.1 million tons, it has replaced China's Hebei Group in
the second position, with production of 44.4 million tons. The merger is
targeted to generate savings in the face of increasingly intense global

China's recent attempt to bolster its economy by approving 60 infrastructure
projects worth more than $150 billion will help bolster the steel sector.
Prices could potentially stabilize on the back of a rebound in construction
activity in the developing countries, in particular China, India and South
Korea. Furthermore, the sector will reap the benefits of the Federal Reserve's
move to boost the U.S economy. However, the European debt crisis and its
potential global impact remain headwinds for the industry.

About Zacks is a property of Zacks Investment Research, Inc., which was formed
in 1978 by Leonard Zacks. As a PhD from MIT Len knew he could find patterns in
stock market data that would lead to superior investment results. Amongst his
many accomplishments was the formation of his proprietary stock picking
system; the Zacks Rank, which continues to outperform the market by nearly a 3
to 1 margin. The best way to unlock the profitable stock recommendations and
market insights of Zacks Investment

Research is through our free daily email newsletter; Profit from the Pros. In
short, it's your steady flow of Profitable ideas GUARANTEED to be worth your
time! Register for your free subscription to Profit from the Pros at

Visit for information about the performance
numbers displayed in this press release.

Follow us on Twitter:

Join us on Facebook:

Disclaimer: Past performance does not guarantee future results. Investors
should always research companies and securities before making any investments.
Nothing herein should be construed as an offer or solicitation to buy or sell
any security.

Media Contact
Zacks Investment Research
800-767-3771 ext. 9339

SOURCE Zacks Investment Research, Inc.

Press spacebar to pause and continue. Press esc to stop.