Global Hunter Announces Trench Results for La Corona de Cobre Project, Chile

Global Hunter Announces Trench Results for La Corona de Cobre Project, Chile 
VANCOUVER, BRITISH COLUMBIA -- (Marketwire) -- 01/28/13 -- Global
Hunter Corp. (TSX VENTURE:BOB) ("Global Hunter" or the "Company") is
pleased to announce positive results of its recently completed
mapping and trenching program at its La Corona de Cobre project.
Global Hunter has identified 14 prospective structures/zones
including two large alteration zones in addition to Las Posadas,
where Global Hunter had previously identified a National Resource
43-101 compliant copper resource (Preliminary Economic Assessment
reported in news release dated September 18, 2012). 
These encouraging results confirm the positive expectations from the
surface sampling program carried out on the property in 2011 (News
releases dated May 2 and 3, 2011) where a total of 205 rock chip
samples were collected form nine shear zones on the property. 
"We view these as high priority drill targets and will be aiming at
expanding the known copper resource on the property. We are very
encouraged by the trench results given the profile of the
mineralization of on the property, where typically the top three to
five metres have most of the copper leached out," stated Mike
Hibbitts, VP Exploration & Development of Global Hunter Corp. 
A total of 31 trenches were excavated along four of the most
promising shear zones. 
Ponderosa 
Four trenches were excavated along 914 metres of strike length of the
Ponderosa shear located 1,500 metres south of Las Posadas. The
trenches were follow-up to the 18 surface samples collected along
1,000 meters of the shear from piquinero workings which averaged
1.85% CuT and 1.44% CuS. 
The following table details results: 


 
--------------------------------------------------------------------------
                                                                  Distance
                                               CuT      CuS           from
Trench             From       To   Length      (%)      (%)   Previous (m)
--------------------------------------------------------------------------
LP4                4.00    15.00    11.00    0.408    0.281              0
LP4       incl     9.00    15.00     6.00    0.694    0.491               
LP3               23.00    42.00    19.00    0.179    0.115            199
LP3       incl    35.00    42.00     7.00    0.342    0.239               
LP2                6.00     9.00     3.00    0.260    0.170            369
LP1               11.00    12.00     1.00    0.457    0.354            346
--------------------------------------------------------------------------

 
Vino Fino 
Eleven trenches were excavated along 1,316 metres of strike length of
the Vino Fino shear located 5,000 metres east of Las Posadas. The
trenches were follow-up to the 43 surface samples collected along
5,600 meters of the shear from piquinero workings which averaged
1.20% CuT and 0.97% CuS. 
The following table details the trench results: 


 
--------------------------------------------------------------------------
                                                                  Distance
                                               CuT      CuS           from
Trench             From       To   Length      (%)      (%)   Previous (m)
--------------------------------------------------------------------------
VF1                       No significant results                          
VF2               28.00    32.00     4.00    0.271    0.206            113
VF3                3.00     6.00     3.00    0.235    0.119            411
VF3        and    11.00    15.00     4.00    0.280    0.144               
VF3        and    22.00    23.00     1.00    0.112    0.059               
VF4A              12.00    17.00     5.00    0.374    0.286            148
VF5               19.00    20.00     1.00    0.173    0.055            187
VF5        and    31.00    32.00     1.00    0.183    0.156               
VF6                8.00     9.00     1.00    0.122    0.083            312
VF6        and    18.00    22.00     4.00    0.110    0.023               
VF6        and    28.00    30.00     2.00    0.164    0.113               
VF6        and    48.00    57.00     9.00    0.271    0.164               
VF8               36.00    71.00    35.00    0.251    0.132            207
VF8       incl    53.00    66.00    13.00    0.450    0.299               
VF10               1.00    29.00    28.00    0.376    0.158            463
VF10      incl    17.00    23.00     6.00    0.780    0.421               
VF13A              0.00    21.00    21.00    0.425    0.239          1,115
VF13A     incl     0.00     9.00     9.00    0.770    0.468               
VF13A      and    13.00    21.00     8.00    0.273    0.127               
VF14                      No significant results                       192
VF15               0.00     1.00     1.00    0.102    0.026             72
VF15       and     3.00     5.00     2.00    0.144    0.053               
VF15       and    10.00    11.00     1.00    0.113    0.030               
VF15       and    15.00    17.00     2.00    0.280    0.156               
--------------------------------------------------------------------------

 
La Varilla 
Three trenches were excavated along 1,316 metres of strike length of
the La Varilla shear located 6,000 metres east of Las Posadas. The
trenches were follow-up to the 10 surface samples collected along
1,600 meters of the shear from piquinero workings which averaged
1.27% CuT and 1.12% CuS. 
The following table details results: 


 
--------------------------------------------------------------------------
                                                                  Distance
                                               CuT      CuS           from
Trench             From       To   Length      (%)      (%)   Previous (m)
--------------------------------------------------------------------------
LV1                8.00    26.00    18.00    0.469    0.221              0
LV1       incl     8.00    16.00     8.00    0.631    0.304               
LV2               21.00     8.00    29.00    0.240    0.180            878
LV2       incl    -4.00     8.00    12.00    0.442    0.342               
LV3                9.00    36.00    27.00    0.260    0.183            438
LV3       incl    10.00    21.00    11.00    0.334    0.240               
Lv3        and    26.00    36.00    10.00    0.324    0.238               
--------------------------------------------------------------------------

 
Golondrina/Cerro Borracho 
Eleven trenches were excavated along 3,873 metres of strike length of
the Golondrina/Cerro Borracho shear located 14 kilometres east of Las
Posadas. The trenches were follow-up to the 80 surface samples
collected along 2,750 meters of the shear from piquinero workings
which averaged 0.807% CuT and 0.541% CuS. 
The following table details results: 


 
----------------------------------------------------------------------------
                                                                    Distance
                                                                        from
                                        Au     CuT     CuS      Fe  Previous
Trench        From      To  Length   (g/t)     (%)     (%)     (%)       (m)
----------------------------------------------------------------------------
LG7           4.00   14.00   10.00           0.237   0.167                 0
LG7          25.00   34.00    9.00           0.416   0.282                  
LG7   incl   32.00   34.00    2.00           1.331   0.939                  
LG6A          0.00    4.00    4.00           0.719   0.462             1,404
LG5           1.00   53.00   52.00   0.020   0.440   0.296             1,075
LG5   incl    1.00   23.00   22.00   0.026   0.415   0.274                  
LG5    and   30.00   48.00   18.00   0.027   0.707   0.495                  
LG5   incl   43.00   47.00    4.00   0.033   1.521   1.065                  
LG4           0.00   47.00   47.00           0.230   0.043               693
LG4   incl   17.00   22.00    5.00   0.082   0.648   0.133                  
LG3A         21.00   28.00    7.00           0.115   0.029               138
LG3B          0.00   13.00   13.00   0.025   0.526   0.354                41
LG3B  incl    0.00    5.00    5.00   0.053   1.037   0.715                  
LG2           7.00   32.00   25.00           0.245   0.074                79
LG2   incl   15.00   21.00    6.00           0.403   0.180 greater          
                                                           than 10          
LG1           0.00   31.00   31.00           0.220   0.065               133
LG1   incl   25.00   29.00    4.00   0.059   0.420   0.134 greater          
                                                           than 10          
CB1           1.00   22.00   21.00           0.213   0.067                87
CB1   incl    3.00    9.00    6.00   0.067   0.193   0.045 greater          
                                                           than 10          
CB1          10.00   14.00    4.00           0.496   0.198                  
CB2           0.00   17.00   17.00           0.193   0.067                92
CB2   incl   10.00   17.00    7.00   0.073   0.213   0.080 greater          
                                                           than 10          
CB3           0.00   18.00   18.00   0.059   0.218   0.062 greater       130
                                                           than 10          
----------------------------------------------------------------------------

 
The geological and technical information contained in this news
release has been reviewed and approved by Mike Hibbitts, P.Geo., who
is a qualified person under the definitions established by National
Instrument 43-101. 
On Behalf of the Board of Directors 
GLOBAL HUNTER CORP. 
Rudy Brauer, President and CEO, Global Hunter Corp.  
Certain statements contained herein may constitute forward-looking
statements and are made pursuant to the "safe harbor" provisions of
the United States Private Securities Litigation Reform Act of 1995
and Canadian securities laws. Forward-looking statements are
statements that relate to future events. Such statements include
estimates, forecasts and statements as to management's expectations
with respect to, among other things, business and financial
prospects, financial multiples and accretion estimates, future
trends, plans, strategies, objectives and expectations, including
with respect to production, exploration drilling, reserves and
resources, exploitation activities and events or future operations.
Information inferred from the interpretation of drilling results and
information concerning mineral resource estimates may also be deemed
to be forward-looking statements, as it constitutes a prediction of
what might be found to be present when, and if, a project is actually
developed. 
In some cases, you can identify forward-looking statements by
terminology such as "may", "should", "expects", "plans,
"anticipates", believes", "estimates", "predicts", "potential", or
"continue" or the negative of these terms or other comparable
terminology. These statements are only predictions and involve known
and unknown risks, uncertainties and other factors that may cause our
or our industry's actual results, level of activity, performance or
achievements to be materially different from any future results,
levels of activity, performance, or achievements expressed or implied
by these forward-looking statements. 
While these forward-looking statements, and any assumptions upon
which they are based, are made in good faith and reflect our current
judgment regarding the direction of our business, actual results will
almost always vary, sometimes materially, from any estimates,
predictions, projections, assumptions or other future performance
suggestions herein. Except as required by applicable law, the Company
does not intend to update any forward-looking statements to conform
these statements to actual results. 
Neither the TSX Venture Exchange nor its Regulation Services Provider
(as that term is defined in the policies of the TSX Venture Exchange)
accepts responsibility for the adequacy or accuracy of this release. 
Contacts:
Global Hunter Corp.
Investor Relations
(604) 681-4653 or 1-866-282-8398
(604) 568-4902 (FAX)
info@globalhunter.ca
www.globalhunter.ca
 
 
Press spacebar to pause and continue. Press esc to stop.