Silvercorp Reports Intercept of 415 g/t Ag, 1.6% Pb and 1.93%

Silvercorp Reports Intercept of 415 g/t Ag, 1.6% Pb and 1.93% Zn Over
7.66 Metres True Width at the GC Project, Guangdong Province, China 
VANCOUVER, BRITISH COLUMBIA -- (Marketwire) -- 11/19/12 -- Silvercorp
Metals Inc. ("Silvercorp" or the "Company") (TSX:SVM)(NYSE:SVM) is
pleased to report results from the 2012 infill and step-out drilling
program for vein V2 ("V2") and the V9 vein group at the GC
silver-lead-zinc project located in Guangdong Province, China.  
V2 is the largest mineralized vein structure in the current resource
and was previously delineated by surface diamond drilling with
spacing of 100 metres ("m") by 100m. The vein is approximately 1,000m
in length along strike and 550m in dip direction between the 180m
elevation and the -450m elevation. The V9 vein group consists of vein
structures V9, V9W-1, V9W-2 and V9-1, of which V9W-2 is the most
important mineralized structure and was discovered following
underground tunneling and drilling in the first half of 2012. In the
second half of 2012 the aim of the underground drilling program is to
upgrade the easily-accessible resource blocks of V2 and to further
define and extend the high-grade V9W-2 vein for initial mining. 
Silvercorp commenced underground infill drilling of V2 and infill and
step-out drilling of the V9 vein group in July 2012. Drilling of V2
has been focused on an area 300m in length and 150m in vertical depth
(from the 100m elevation down to the -50 m elevation) using two
underground drill rigs with spacing of approximately 25m by 25m.  
Drilling of the V9 vein group was conducted in an area 400m in length
and 150m in vertical depth between the 0m elevation and the 150m
elevation using three underground drill rigs.  
Highlights of selected intercepts are as follows: 


 
--  Drill Hole CK1425 intercepted over 9.58m interval, 7.60m true width, of
    V2 grading 176 grams per tonne ("g/t") silver ("Ag"), 0.60% lead ("Pb"),
    4.94% zinc ("Zn") and 0.20% tin ("Sn") at the 36m elevation, including
    an interval of 1.84m, 1.46m true width, grading 376 g/t Ag, 1.25% Pb,
    13.40% Zn and 0.31% Sn; 
 
--  Drill Hole CK1500 intercepted over 13.76m interval, 9.73m true width, of
    V2 grading 126 g/t Ag, 0.39% Pb, 1.84% Zn and 0.34% Sn at the 14m
    elevation, including an interval of 1.21m, 0.86m true width, grading 388
    g/t Ag, 1.66% Pb, 10.95% Zn and 0.69% Sn; 
 
--  Drill Hole CK1701 intercepted over 16.54m interval, 12.22m true width,
    of V2 grading 169 g/t Ag, 2.23% Pb, 2.57% Zn and 0.14% Sn at the 38m
    elevation, including an interval of 1.73m, 1.28m true width, grading 606
    g/t Ag, 11.80% Pb, 0.87% Zn and 0.10% Sn; 
 
--  Drill Hole CK1800 intercepted over 12.15m interval, 8.89m true width, of
    V2 grading 155 g/t Ag, 0.96% Pb, 2.89% Zn and 0.31% Sn at the 13m
    elevation, including an interval of 2.11m, 1.55m true width, grading 527
    g/t Ag, 0.42% Pb, 0.59% Zn and 1.12% Sn; 
 
--  Drill Hole CK2100 intercepted over 11.09m interval, 8.46m true width, of
    V2 grading 185 g/t Ag, 5.63% Pb, 3.91% Zn and 0.36% Sn at the 5m
    elevation, including an interval of 2.46m, 2.25m true width, grading 443
    g/t Ag, 18.54% Pb, 9.52% Zn and 0.62% Sn; 
 
--  Drill Hole CK1651 intercepted over 4.74m interval, 3.31m true width, of
    V9 grading 233 g/t Ag, 1.17% Pb, 11.78% Zn and 0.21% Sn at the -16m
    elevation; 
 
--  Drill Hole CK1753 intercepted over 10.55m interval, 7.66m true width, of
    V9W-1 grading 415 g/t Ag, 1.60% Pb, 1.93% Zn and 0.04% Sn at the 69m
    elevation, including an interval of 1.81m, 1.31m true width, grading
    1,010 g/t Ag, 0.95% Pb, 1.52% Zn and 0.05% Sn and an interval of 1.36m,
    0.99m true width, grading 1,140 g/t Ag, 8.49% Pb, 5.78% Zn and 0.09% Sn;
 
--  Drill Hole CK1850 intercepted over 4.11m interval, 3.99m true width, of
    V9W-2 grading 157 g/t Ag, 0.27% Pb, 0.50% Zn and 0.05% Sn at the 128m
    elevation; 
 
--  Drill Hole CK1925 intercepted over 3.75m interval, 3.38m true width, of
    V9-1 grading 288 g/t Ag, 0.57% Pb, 0.91% Zn and 0.07% Sn at the 36m
    elevation, including an interval of 1.44m, 1.30m true width, grading 500
    g/t Ag, 0.19% Pb, 1.24% Zn and 0.07% Sn. 

 
Of the 25 holes completed on V2, 17 holes intercepted high-grade
silver-zinc-lead mineralization which confirmed the wide high-grade
intercepts in the previously reported widely-spaced surface diamond
drilling program. Two holes, CK1100 and CK1216 at the western end of
V2 encountered fractured structures and no drill core was recovered.
Six holes were drilled in the artisanal area which had been mined
out; three holes (Drill Holes CK1300, CK1409 and CK1631) penetrated
through the narrow mined out stopes intercepting the limited
mineralization at the footwall of the old stopes. The other three
holes were abandoned. 
Table 1 below contains assay results for 17 holes that intercepted
mineralization of V2. Based on the results of 14 holes (Drill Holes
CK1300, CK1409 and CK1631 have been excluded since these holes
drilled into mined out stopes and actual interceptions of the vein
are unknown), V2 has an average true width of 5.98m. In addition to
silver, lead, and zinc, V2 also contains significant tin. The drill
intervals indicate that the hanging wall of V2 is dominated by
silver-lead-zinc mineralization with a lead-zinc grade greater than
25% (e.g. Drill Hole CK2100) while the footwall of V2 is dominated by
silver-tin mineralization with tin grades in excess of 1% such as
Drill Hole CK1800.  
Based on the price of tin concentrate (60% tin) in Hunan Province as
at November 14, 2012 (being US$19,680 per tonne or US$328 per 1% of
tin in concentrate), the presence of tin is expected to enhance the
economics of the GC Project. The 1,600 tonne per day mill at the GC
project has been designed to include a tin gravity circuit and as
such the Company expects to be able to realize the value of tin
contained in mineralization. Metallurgical testing indicates that the
Company can expect a tin recovery rate of greater than 40%.  
As of the end of October 2012, 25 drill holes totalling over 3,800m
were completed on V2 and 23 drill holes totalling over 5,000m were
completed on the V9 vein group. Assay data for 12 of the 23 holes on
the V9 vein group was received and nine holes intercepted
mineralization (Table 2). V9W-2 has been extended for more than 400m
along strike using step-out drilling and the western section of the
vein has been infilled with grid drilling spaced at 25m by 25m. The
Company plans to commence the development of initial mining stopes
within the V2 and V9W-2 mineralized structures in 2013. 
Silvercorp is continuing with its infill and step-out drilling
program at the GC Project and currently has on site five underground
drill rigs and two surface drill rigs. 
Table 1: Assay results from the infill drilling program for Vein V2 


 
----------------------------------------------------------------------------
                                                              True          
                                from        to  Interval     Width Elevation
Drill Hole                       (m)       (m)       (m)       (m)       (m)
----------------------------------------------------------------------------
CK1003                         78.99     82.00      3.01      0.92        79
----------------------------------------------------------------------------
CK1200                        109.35    119.79      6.76      3.48        -8
----------------------------------------------------------------------------
CK1300                         85.02     87.68      2.66      1.91        25
----------------------------------------------------------------------------
CK1301                        112.21    119.03      6.82      4.15        -3
----------------------------------------------------------------------------
CK1409                        127.36    128.76      1.40      0.26        28
----------------------------------------------------------------------------
CK1425                         94.90    104.48      9.58      7.60        36
Including                      94.90     96.74      1.84      1.46          
----------------------------------------------------------------------------
CK1426                         95.35    107.59     12.24     10.04        43
Including                      98.25    103.06      4.81      1.07          
----------------------------------------------------------------------------
CK1500                        124.64    141.96     13.76      9.73        14
Including                     130.71    131.92      1.21      0.86          
----------------------------------------------------------------------------
CK1631                         87.52     88.62      1.10      0.92        88
----------------------------------------------------------------------------
CK1700                         87.74     97.27      9.53      5.96        20
                              116.74    118.15      1.41      0.88        -7
----------------------------------------------------------------------------
CK1701                         74.23     91.68     16.54     12.22        38
Including                      84.34     86.07      1.73      1.28          
----------------------------------------------------------------------------
CK1800                         97.12    109.27     12.15      8.89        13
Including                     107.16    109.27      2.11      1.55          
----------------------------------------------------------------------------
CK1901                         94.07     98.16      4.09      3.73        43
----------------------------------------------------------------------------
CK2025                        108.77    113.23      4.46      3.82        34
----------------------------------------------------------------------------
CK2075                         94.65     98.38      3.73      3.32        75
----------------------------------------------------------------------------
CK2100                        150.78    161.87     11.09      8.46         5
Including                     155.00    157.95      2.46      2.25          
                              176.89    180.68      3.79      2.89       -11
Including                     178.19    179.55      1.36      1.04          
                              185.30    186.70      1.40      1.07       -16
                              192.12    193.17      1.05      0.80       -21
----------------------------------------------------------------------------
CK3003                        210.16    211.74      1.58      1.36       -41
----------------------------------------------------------------------------
 
----------------------------------------------------------------------------
                                Ag      Pb      Zn      Sn       Mineralized
Drill Hole                   (g/t)     (%)     (%)     (%)              Vein
----------------------------------------------------------------------------
CK1003                          71    0.24    2.13    0.03                V2
----------------------------------------------------------------------------
CK1200                          20    0.06    3.46    0.19                V2
----------------------------------------------------------------------------
CK1300                          60    0.51    1.94    0.04       V2 footwall
----------------------------------------------------------------------------
CK1301                          55    0.14    3.05    0.04                V2
----------------------------------------------------------------------------
CK1409                          41    0.04    2.99    0.07       V2 footwall
----------------------------------------------------------------------------
CK1425                         176    0.60    4.94    0.20                V2
Including                      376    1.25   13.40    0.31                  
----------------------------------------------------------------------------
CK1426                         118    0.13    5.35    0.13                V2
Including                      169    0.10    9.24    0.11                  
----------------------------------------------------------------------------
CK1500                         126    0.39    1.84    0.34                V2
Including                      388    1.66   10.95    0.69                  
----------------------------------------------------------------------------
CK1631                          80    0.66    1.01    0.15       V2 footwall
----------------------------------------------------------------------------
CK1700                         109    0.13    1.13    0.27                V2
                               209    0.15    0.12    0.03 New zone, no name
----------------------------------------------------------------------------
CK1701                         169    2.23    2.57    0.14                V2
Including                      606   11.80    0.87    0.10                  
----------------------------------------------------------------------------
CK1800                         155    0.96    2.89    0.31                V2
Including                      527    0.42    0.59    1.12                  
----------------------------------------------------------------------------
CK1901                          71    0.05    2.84    0.16                V2
----------------------------------------------------------------------------
CK2025                         119    1.67    2.11    0.11                V2
----------------------------------------------------------------------------
CK2075                          29    0.61    1.44    0.01                V2
----------------------------------------------------------------------------
CK2100                         185    5.63    3.91    0.36                V2
Including                      443   18.54    9.52    0.62                  
                               177    1.17    0.81    0.33 New zone, no name
Including                      394    1.59    1.18    0.71                  
                               117    0.12    0.29    0.17 New zone, no name
                                61    4.10    1.64    0.02 New zone, no name
----------------------------------------------------------------------------
CK3003                          33    0.55    2.01    0.04                V2
----------------------------------------------------------------------------

 
Table 2: Assay results from the infill and step-out drilling program
for the V9 vein group 


 
----------------------------------------------------------------------------
                                                              True          
                                from        to  Interval     Width Elevation
Drill Hole                       (m)       (m)       (m)       (m)       (m)
----------------------------------------------------------------------------
CK1651                         10.42     11.52      1.10      0.77       127
                               71.51     73.37      1.86      1.30        74
                              148.42    150.98      2.56      1.79         8
                              177.02    181.76      4.74      3.31       -16
----------------------------------------------------------------------------
CK1753                         80.87     82.48      1.61      1.17        96
                              118.80    130.27      7.46      5.42        77
                              134.79    145.34     10.55      7.66        69
Including                     136.30    138.11      1.81      1.31        68
                              140.97    142.33      1.36      0.99        66
----------------------------------------------------------------------------
CK1812                         87.83     88.93      1.10      1.02       117
                              170.44    171.91      1.47      1.37        84
                              187.76    189.19      1.43      1.33        77
----------------------------------------------------------------------------
CK1850                         50.78     54.89      4.11      3.99       128
                               82.68     84.08      1.40      1.36       116
                              189.59    190.79      1.20      1.16        76
----------------------------------------------------------------------------
CK1925                        159.39    160.14      0.75      0.68        43
                              165.56    166.85      1.29      1.16        39
                              170.63    174.38      3.75      3.38        36
Including                     170.63    172.07      1.44      1.30        36
                              180.76    186.72      5.96      5.37        29
                              213.80    215.07      1.27      1.14         7
                              224.93    226.69      1.76      1.59        -1
----------------------------------------------------------------------------
CK2017                         21.50     23.02      1.52      1.27       133
----------------------------------------------------------------------------
CK2150                         50.64     51.47      0.83      0.76       126
                              181.20    182.19      0.99      0.96        57
                              245.91    246.90      0.99      0.96        23
                              282.23    283.34      1.11      1.07         3
----------------------------------------------------------------------------
CK2151                         47.18     48.90      1.72      1.70       132
                              119.38    120.44      1.06      1.05       101
                              175.32    176.95      1.63      1.61        76
                              183.94    185.25      1.31      1.29        72
                              207.38    208.43      1.05      1.04        62
----------------------------------------------------------------------------
CK2465                         82.46     83.50      1.04      1.04       140
                              141.99    143.51      1.52      1.52       120
                              153.73    154.55      0.82      0.82       116
                              223.53    224.79      2.38      2.38        92
                              279.79    281.32      1.53      1.53        72
                              295.29    296.98      1.69      1.69        67
                              372.24    374.07      1.83      1.83        41
----------------------------------------------------------------------------
 
----------------------------------------------------------------------------
                                Ag      Pb      Zn      Sn       Mineralized
Drill Hole                   (g/t)     (%)     (%)     (%)              Vein
----------------------------------------------------------------------------
CK1651                         422    0.41    0.31    0.05 New zone, no name
                                60    0.17    0.17    0.01             V9W-2
                               126    0.08    0.69    0.23             V9W-1
                               233    1.17   11.78    0.21                V9
----------------------------------------------------------------------------
CK1753                          60    0.72    0.86    0.02              V9-1
                                51    0.08    6.14    0.14             V9W-2
                               415    1.60    1.93    0.04             V9W-1
Including                    1,010    0.95    1.52    0.05                  
                             1,140    8.49    5.78    0.09                  
----------------------------------------------------------------------------
CK1812                          91    0.05    0.20    0.06              V9-1
                                14    0.02    2.48    0.03             V9W-2
                                94    0.07    1.55    0.07             V9W-1
----------------------------------------------------------------------------
CK1850                         157    0.27    0.50    0.05             V9W-2
                               197    1.19    3.91    0.21         V9-Branch
                                33    0.03    2.02    0.03 New zone, no name
----------------------------------------------------------------------------
CK1925                          84    0.14    1.67    0.13 New zone, no name
                                63    0.06    0.91    0.10 New zone, no name
                               288    0.57    0.91    0.07              V9-1
Including                      500    0.19    1.24    0.07                  
                                71    1.37    0.29    0.01              V9-1
                               171    0.08    4.02    0.04             V9W-2
                                57    0.02    0.75    0.06             V9W-1
----------------------------------------------------------------------------
CK2017                         202    0.06    2.67    0.19             V9W-2
----------------------------------------------------------------------------
CK2150                          85    0.07    0.77    0.03 New zone, no name
                                79    0.05    4.76    0.10             V9W-2
                                32    0.48    4.20    0.07                V9
                                63    0.22    0.94    0.04 New zone, no name
----------------------------------------------------------------------------
CK2151                          60    0.26    1.00    0.03 New zone, no name
                                37    0.03    2.19    0.15 New zone, no name
                               191    0.12    0.23    0.04      V9W-2-Branch
                                83    0.24    0.82    0.03             V9W-2
                                60    0.02    3.74    0.20             V9W-1
----------------------------------------------------------------------------
CK2465                         455    0.94    0.43    less New zone, no name
                                                      than                  
                                                      0.01                  
                               355    0.65    0.95    0.02 New zone, no name
                               477    0.51    0.35    0.03 New zone, no name
                                69    0.14    3.08    0.04 New zone, no name
                                53    0.04    1.19    0.02 New zone, no name
                               180    0.49    3.34    0.20             V9W-2
                                56    0.14    3.76    0.11                V9
----------------------------------------------------------------------------

 
Quality Control  
Drill cores are in NQ size. Drill core samples, from 1.00m to 1.50m
in length, or limited by apparent mineralization contact or
shear/alteration contact, were split into halves by saw cutting. One
half of the cores are stored in the Company's core shacks for future
reference and checking and the other remaining samples are shipped in
security sealed bags to ALS Chemex in Guangzhou, China (Certification
ISO 9001), located approximately 180km southeast of the GC project
site for sample preparation and assay. 
Sample preparation consists of drying, crushing and splitting of
samples to 250 grams and then they are pulverized to 200 mesh.
Silver, lead, and zinc in drill core samples were analyzed by aqua
regia digestion and AAS finish. Tin was analyzed by fusing with
peroxide then by leaching the melt and acidifying to precipitate the
tin for AAS finish.  
The Company maintains a comprehensive quality assurance and quality
control program to ensure best practices in sample preparation and
analysis of the drill core samples. Project geologists regularly
insert certified reference materials (CRM), field duplicates and
blanks to each batch of core samples to monitor the sample
preparation and analysis procedures at the labs. The analytical
quality of the labs is further evaluated with external checks by
sending about 3% of the pulp samples to higher-level labs to check
for lab bias. 
Data from both the Company's and the labs' QA/QC programs are
reviewed and evaluated in a timely manner by project geologists. 
Rujin Jiang, P. Geo., is the Qualified Person on the project as
defined under National Instrument 43-101. He has verified the
information and has reviewed and approved the contents of this news
release. 
About Silvercorp  
Silvercorp is a low-cost silver-producing Canadian mining company
with multiple mines in China which has paid a cash dividend since
2007. The Company is currently developing the GC project in southern
China which it expects will become its next operating mine in early
2013. The Company's vision is to deliver shareholder value by
focusing on the acquisition of under developed small-scale projects
with resource potential and self-fund the growth of those assets. For
more information, please visit our website at www.silvercorp.ca. 
CAUTIONARY DISCLAIMER -- FORWARD-LOOKING STATEMENTS 
Certain of the statements and information in this press release
constitute "forward-looking statements" within the meaning of the
United States Private Securities Litigation Reform Act of 1995 and
"forward-looking information" within the meaning of applicable
Canadian provincial securities laws. Any statements or information
that express or involve discussions with respect to predictions,
expectations, beliefs, plans, projections, objectives, assumptions or
future events or performance (often, but not always, using words or
phrases such as "expects", "is expected", "anticipates", "believes",
"plans", "projects", "estimates", "assumes", "intends", "strategies",
"targets", "goals", "forecasts", "objectives", "budgets",
"schedules", "potential" or variations thereof or stating that
certain actions, events or results "may", "could", "would", "might"
or "will" be taken, occur or be achieved, or the negative of any of
these terms and similar expressions) are not statements of historical
fact and may be forward-looking statements or information.
Forward-looking statements or information relate to, among other
things: the price of silver and other metals; the accuracy of mineral
resource and mineral reserve estimates at the Company's material
properties; the sufficiency of the Company's capital to finance the
Company's operations; estimates of the Company's revenues and capital
expenditures; estimated production from the Company's mines in the
Ying Mining Camp; timing of receipt of permits and regulatory
approvals; availability of funds from production to finance the
Company's operations; and access to and availability of funding for
future construction, use of proceeds from any financing and
development of the Company's properties. 
Forward-looking statements or information are subject to a variety of
known and unknown risks, uncertainties and other factors that could
cause actual events or results to differ from those reflected in the
forward-looking statements or information, including, without
limitation, risks relating to: fluctuating commodity prices;
calculation of resources, reserves and mineralization and precious
and base metal recovery; interpretations and assumptions of mineral
resource and mineral reserve estimates; exploration and development
programs; feasibility and engineering reports; permits and licences;
title to properties; First Nations title claims and rights; property
interests; joint venture partners; acquisition of commercially
mineable mineral rights; financing; recent market events and
conditions; economic factors affecting the Company; timing, estimated
amount, capital and operating expenditures and economic returns of
future production; integration of future acquisitions into the
Company's existing operations; competition; operations and political
conditions; regulatory environment in China and Canada; environmental
risks; foreign exchange rate fluctuations; insurance; risks and
hazards of mining operations; key personnel; conflicts of interest;
dependence on management; internal control over financial reporting
as per the requirements of the Sarbanes-Oxley Act; and bringing
actions and enforcing judgments under U.S. securities laws. 
This list is not exhaustive of the factors that may affect any of the
Company's forward-looking statements or information. Forward-looking
statements or information are statements about the future and are
inherently uncertain, and actual achievements of the Company or other
future events or conditions may differ materially from those
reflected in the forward-looking statements or information due to a
variety of risks, uncertainties and other factors, including, without
limitation, those referred to in the Company's Annual Information
Form for the year ended March 31, 2012 under the heading "Risk
Factors". Although the Company has attempted to identify important
factors that could cause actual results to differ materially, there
may be other factors that cause results not to be as anticipated,
estimated, described or intended. Accordingly, readers should not
place undue reliance on forward-looking statements or information.  
The Company's forward-looking statements and information are based on
the assumptions, beliefs, expectations and opinions of management as
of the date of this press release, and other than as required by
applicable securities laws, the Company does not assume any
obligation to update forward-looking statements and information if
circumstances or management's assumptions, beliefs, expectations or
opinions should change, or changes in any other events affecting such
statements or information. For the reasons set forth above, investors
should not place undue reliance on forward-looking statements and
information.
Contacts:
Silvercorp Metals Inc.
Jonathan Hackshaw
Director, Investor Relations
(604) 669-9397 or Toll Free 1(888) 224-1881
investor@silvercorp.ca
www.silvercorp.ca